To Select Connected Equipment - Philips 29PT9417/12 User Manual

Connect stereo amplifier and two extra front speakers

To select connected equipment

Press the v key on the remote control repeatedly to select
to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
Cinema Link surround receiver
See the separate supplied Cinema Link instruction manual.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Recorder or DVD with EasyLink
The recorder (VCR or DVD+RW) or DVD can
be operated with the remote control via the
Recorder or
DVD
Recorder
Ò
Rwd Play
DVD
Ò p
Prev. Play
AUDIO
menu on screen.
p ‡ π †
Stop Play Ffw
‡ π †
Stop Play Next Eject
To enhance the sound reproduction of your TV
you can connect two extra front loudspeakers via
an external amplifier.
Connect the audio cables to the audio input of
your amplifier and to
of your TV.The output level is controlled by the
volume control of your TV.
Note: Switch off the TV and your audio amplifier before
connecting them. Set the audio amplifier's volume to
minimum.
&
Press the
é Select the
cursor up/down.
"
Press the cursor left/right, up/down to select
one of the recorder or DVD functions.
®
Ï
Rec Eject
The ® key for recording can be operated in the TV
mode.
If your EasyLink recorder has the system standby
Ï
function, when you press the B key for 3 seconds,
both TV and the recorder are switched to standby.
AUDIO L
, , or
EXT1 EXT2 EXT3
key on the remote control.
MENU
or
Recorder
DVD
and at the back
R
according
SIDE
menu with the
19