Unfolding / Folding - Viro Vega User Manual

UNFOLDING / FOLDING

Ask a competent adult to transform the Vega™ into the desired configuration. Turn the unit OFF before transforming.
NOTE
If the deck button will not engage, use a rubber mallet (not included) to press it in and shift it to the next position.
To unfold, press in the deck button and push the front
1
assembly outward until the button locks in position 2 (bike)
or position 3 (scooter).
BIKE
Lift the bike upright and engage the bike kickstand.
Unlatch the neck clamp. Press the neck button and slide the
1
deck all the way to the top of the front assembly and ensure
the button is locked. Then, close the neck clamp. Press the
deck button inward and slide it to position 2 until it locks.
Pull the seat latch forward until it locks into place in the
3
groove under the deck.
To fold, press in the deck button and pull in the front
2
assembly until the button locks in position 1. The deck
button should be locked at the top of the front assembly.
Pull the release lever from the back of the deck and lift up
2
the seat.
Lower the footrests and adjust the handlebar as needed.
4
6