Table of Contents
Advertisement
AV50
SETTINGS
There are three main settings menus, accessed via the VIDEO, AUDIO and MENU
buttons on the front of the AV50. Settings can be viewed/adjusted on the LCD screen.
Rotate the Set/Enter control to scroll through menus and push the control to confirm.
VIDEO
Push the VIDEO button to access the video transition options. Here you can adjust the
Transition Time and Transition Type. After the transition time and type are set, using
the INPUT button to transition between video sources will follow the rules set in the
VIDEO menu.
The transition time can be
set between 0 and 9.99
seconds in 0.01 second
increments.
AUDIO
Push the AUDIO button to access advanced audio options. Adjust the Level options for
each applicable input (SDI, HDMI, XLR and LINE) and the main mix. The SDI and HDMI
inputs also offer a "Follow" option that can be turned on and off. When either input is set
to "Follow", the audio for that input will be sent to the main program output when that
input is selected. Embedding an input will send that source's audio to the main program.
Adjust the final output level
of your program. This will
include any of the audio
sources sent to your final
program. The Main level
can be adjusted between 0
and 100.
English
The SDI and HDMI audio
level, as taken from your
video input sources, are
controlled here. The audio
level
can
be
adjusted
between -42 dB and 4.5 dB.
10
The AV50 offers 3 transition
types: Cut, Mix and Fade.
The selected transition will
be utilized when switching
between input sources.
The XLR and LINE inputs
can be injected into the final
production. The audio level
can be adjusted between
-42 dB and 4.5 dB.
Advertisement
Table of Contents
