Table of Contents
Advertisement
Note：Frequency ID and wave ID cannot be operated at the same time.
To avoid risk of serious eye damage, please do not look into the optical port of laser source at any time.
5.7 Power Off
Automatic power off: When auto-off function is activated, the unit will turn itself off automatically after
10minutes idle time, whatever the power supply is with alkaline batteries or is with power supply adaptor
directly.
Manual power off: Under any operation mode, hold down
Note: With either power off operation, the unit will store the last calibration wavelength and backlight
control mode automatically, which will be the default setting when user turns unit on next time.
Chapter 6 Trouble shooting.
Problems
Faint display on the LCD
screen
When on the laser
source, the output
power is not stable
Handheld Optical Light Source-JW3116
270Hz
330Hz
1KHz
2KHz
JW3116 Light Source
5-15
Possible cause
1.
Power is off
2.
The battery power is
too low
JW3216 Power Meter
for a few seconds to turn the unit off.
1.
Press
2.
Change the batteries
After 15 min. preheat
13
270Hz
330Hz
1KHz
2KHz
Solution
key.
Advertisement
Table of Contents
