Getting Started - VTech Rattle & Waggle Learning Pup Parents' Manual

GETTING STARTED

BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back
of the puppy's head. Use a screwdriver
to loosen the screw.
3. Install 4 new AA (AM-3/LR6) batteries
following the diagram inside the
battery box. (The use of new alkaline
b a t t e r i e s i s r e c o m m e n d e d fo r
maximum performance.)
4. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
4