Side Connections - Philips 34PT9421/69R User Manual

AV3/AV4 Digital High Definition input
Y
AUDIO
Pb L
Pr R
AV 4
IN
When you have a digital equipment with a 480p or
1080i output (e.g. a digital Set Top Box or
Progressive DVD player), connect it to the
2Fh 480p/1080i input.
AV4 IN VIDEO

Side connections

1
Camera or camcorder
&
Connect your camera or camcorder to sockets
at the right side of your TV.
é
Connect the equipment to
3 for mono equipment. For stereo
AUDIO L
equipment also connect
S-Video quality with an S-VHS, Hi-8 or Digital
camcorder is obtained by connecting the
S-Video cables with the
(instead of
VIDEO
Note: If you prefer, you can also connect the
camcorder to one of the TV's rear
20
RGB Y
AUDIO
Pb L
Pr R
VIDEO 2Fh
480p/1080i
AV 3
IN
2 3
2 and
VIDEO
3.
AUDIO R
input 1
S-VIDEO
2) and inputs 3.
AUDIO
jacks.
AV IN
Connect the equipment with 2Fh RGB output to
the
RGB
jacks of
AV3
Connect the equipment with 2Fh YPbPr output to
the ,
Y Pb
jacks of
AV4
See also the manual of your High Definition
equipment.
Note: This television is designed to accept high definition
signal standards 1080i and 480p as specified by the
Electronic Industries Association standard EIA770.3 as
or
AV3
well as 2Fh-signal standards 576p and 1152i.
Digital devices from different manufacturers have the
possibility of differing output standards which may
cause difficulties for the television to properly display.
Warning: in case you notice scrolling images, wrong
colours or no colour, no picture, or even combinations of
these on your screen, check if the connections are done
in the right way.
The AV3 input
or any other VGA device.
Headphone
Insert the plug into the headphone socket L
&
at the right side of the TV.
Press ¬ on the remote control to switch off
é
the internal loudspeakers of the TV.
The headphone impedance must be between 8
and 4000 Ohm. The headphone socket has a
3.5 mm jack.
In the
volume
When the headphone is connected, the
surround mode is always stereo.
Note:
When Dual screen/PIP is activated (see p. 14):
- if the main screen displays a TV channel picture,
you hear the sound from the Dual screen/PIP
picture through your headphone;
- if the main screen displays a picture from a
peripheral equipment, you hear the sound from the
main screen through your headphone.
Note: When using the
connect any device to the video input.
connector and to the
.
and jacks and to the
Pr
.
be used to connect a computer
can not
menu select
Sound Headphone
to adjust the headphone volume.
S-VIDEO
and
L R AUDIO
and
L R AUDIO
connector do not