Datalogic OM-GRYPHON Series Quick Reference page 8

UK/US
USING OM-GRYPHON RADIO CRADLE
The OM-GRYPHON cradle, paired with one Gryphon™ M series reader, builds
a Cordless Reading System for the collection, decoding and transmission of
barcoded data.
It can be connected to a Host PC through an RS232, Wedge or Pen emulation
cable and is suited for a single-cradle layout.
The LEDs signal the OM-GRYPHON status, as described in the following table:
LED
Yellow
Red
Green
Reconditioning battery
button
Power on / Data
(yellow LED)
To setup your OM-GRYPHON cradle you must:
1. Make all system connections.
2. Configure the OM-GRYPHON cradle.
2
On = OM-GRYPHON is powered.
Blinking = OM-GRYPHON
commands from the Host or the reader.
On = the battery charge is in progress.
On = the battery is completely charged.
STATUS
receives
Charging
(red LED)
Charge completed
(green LED)
DATALOGIC
data and