D-Link PowerLine DHP-W611AV Quick Installation Manual page 4

2. Fully extend the antennas and plug the DHP-W610AV into a wall outlet in a
place you want to extend your network. Slide the power switch on the side of
the device to the ON position.
3. Insert one end of the second included Ethernet cable into the DHP-W610AV,
and the other end into your computer. If you are using a wireless device
such as a mobile or tablet, connect to the DHP-W610AV over Wi-Fi with the
information on the Wi-Fi Configuration Card.
4. You have now finished the hardware setup of your PowerLine AV2 1000
Wi-Fi AC1200 Starter Kit. You must complete the First-time Configuration in
the next section before you can use your product.
ROOM A
4
Internet
2
2
ROOM B
3
PC
DHP-P610AV
Router
DHP-W610AV
Tablet
ROOM B
DHP-W610AV
PC
DHP-W611AV