Waterpik waterflosser WP-600 Series Quick Start Manual

QUICK START GUIDE
1
First Use
ON
OFF
Fill reservoir with warm
water and replace it
rmly on the base.
2
Water Floss
Power
ON
Low
With power OFF and water
switch in OFF position, place
tip in mouth. Turn power ON.
Turn water switch to ON.
This device is only compatible with voltages of 120VAC, 60Hz
WP-600 Series
Fill
Replace
Insert tip rmly until it
clicks into place.
ON
OFF
Lean over sink. Close lips
enough to prevent splashing,
while still allowing water to
ow from mouth into sink.
waterpik.com/welcomeWF
Register your product and
receive over $50 in savings.
waterpik.com/registration
Power
ON
Insert
High
ON
OFF
Floss
Massage
Visit
ON
Water
OFF
ON
Turn pressure to high, point
tip into sink, turn power on
and water switch to ON
until water ows. Turn OFF.
Aim water at the gumline at
a 90 degree angle. Follow the
gumline and pause brie y
between teeth.
©2019 Water Pik, Inc.