How To Use The Surf Control; How To Use The Pixel Plus Control (Depending On Model) - Philips 26PF5320/78 User Manual

A
list or series of previously viewed channels can
be selected with the SURF button on your
remote control. With this feature, you can easily
switch between different TV channels that currently
interest you. The SURF control allows you to set up
to ten channels in its quick viewing list.
1
Press the CHANNEL(+) or (–) button (or
the numbered buttons) to select a channel
to add to the SURF list.
2
Press the SURF button on the remote
control. The onscreen display may read,
"SURF LIST EMPTY." The number of
the current channel will be shown with
"ADD?" to the right.
3
While the SURF list message or the SURF
channel list appears on the screen, press
the CURSOR RIGHT button to add the
present channel to the SURF list.
4
If you want to delete the present channel
from the SURF list, press the CURSOR
RIGHT button again.
Repeat steps 1 through 3 to add more channels
(up to 10) to the SURF list.
H H
ELPFUL
Along with regularly programmed channels,
the external video source connections can be
added to the SURF list. This means that the
external A/V Jacks and their channels can
be added to your SURF list. Use the Source
button to tune their channel and use the same
steps described on this page to add those
channels to the Surf list.
H
OW TO USE THE
PixelPlus™ creates near high-definition (HD)
performance inside the TV on the basis of a regular
input signal. By doubling the number of lines
and the number of pixels per line, PixelPlus™
enhances both regular broadcasts and DVD input
for unparalleled sharpness and depth. You can view
the difference in a regular broadcast signal and one
enhanced with PixelPlus™ by following the steps
below.
1
Press the Pixel Plus button on the remote
control. APixel Plus demo will appear
on the screen. The left hand side of the
screen show the picture without Pixel Plus
enhancement while the right side is shown
with the Pixel Plus control On.
2
Press the Pixel Plus button on the remote
control to remove the demo screen.
NOTE: You cannot turn Pixel Plus™ off, it is a
feature of the TV. You can only see the difference
in a signal with or without PixelPlus™.
H
OW TO USE THE
Surf List Empty
INT
P
IXEL
S C
URF ONTROL
Surf List
3 Add?
3
4
1
2
P C
(depending on model)
LUS ONTROL
Pexel Plus Demo
Pixel Plus Demo
Off
1
2
25
Surf List Surf List
3 3 Delete?
Surf List
3
5 Add?
Surf List
3
5 Delete?
On