Switch on Scenea
1
Press .
2
Select [Scenea], then press OK.
» If no picture has been set, the default
picture is displayed.
» If a customised Scenea picture is
loaded, that picture is displayed.
Note
•
Scenea feature is not available when the set is
in Shop mode.
Customise the Scenea picture
You can load another picture as the wallpaper.
Note
•
When you load a new Scenea picture, it
overrides the current Scenea picture.
•
To use another picture as the wallpaper, you
need a USB storage device that contains a
picture that is less than 1 MB in size.
1
Load a picture smaller than 1MB in size
into a USB storage device.
2
Connect the USB storage device to the
TV.
3
Press .
4
Select [Browse USB], then press OK.
5
Select a picture, then press
OPTIONS.
6
Select [Set as Scenea], then press OK.
» A confirmation message is displayed.
Play photos, music and videos
on USB storage devices
Video file format supported by USB devices:
•
Supported storage devices: USB (for
FAT or FAT 32 format only)
•
Supported multimedia file format
•
Image: JPEG
•
Audio:MP3
•
Video: MPEG 2/MPEG 4 , H.264 ,
WMV
Caution
•
Philips is not responsible if the USB storage
device is not supported, nor is it responsible
for damage or loss of data from the device.
Note
•
When USB is connected,TV set will go to USB
source after every stand-by.
Connect a USB storage device to play
photos,music or videos stored on it.
1
Switch on the TV.
2
Connect the USB device to the USB port
on the side of your TV.
3
Press .
4
Select [Browse USB], then press OK.
» The USB browser appears.
View photos
1
In the USB browser, select [Picture], then
press OK.
2
Select a photo or a photo album, then
press OK to view the photo enlarged to
fill the TV screen.
•
To view the next or previous photo,
press
.
View a slide show of your photos
1
When a full screen image of a photo is
displayed, press OK.
» A slide show begins from the selected
photo.
2
Press the following buttons to control
play:
•
to play.
•
to pause.
•
or
to play the previous or next
photo.
•
to stop.
EN
15