Reinstall The Tv - Philips 52PFL5605H/05 User Manual

3. In your web browser, navigate to
(http://www.philips.com/support).
4. On the Philips Support site, find your
product and locate the Help file for your TV
set. The Help file (a *.upg file) is compressed
into a *.zip archive.
5. If the Help file on the Philips Support site
is a later version than the file in your TV,
click it to save the file to the USB flash drive.
6. Using the archive utility, extract the *.zip
file to the 'upgrades' folder on the USB flash
drive.
7. The *.upg Help file is extracted.
8. Disconnect the USB flash drive from the
PC.

Do not switch off the TV or remove
the USB flash drive during the update.

If a power failure occurs during the
update, do not remove the USB flash
drive from the TV. The TV will
continue the update as soon as power
is restored.

If an error occurs during the update,
retry the procedure. If the error
reoccurs, contact Philips Consumer
Care.
1. Switch on the TV.
2. Connect the USB flash drive containing
the *.upg Help file to the USB connector on
the TV. Disconnect all other USB devices
from the TV.
3. Press .
4. Select [Setup] > [Software settings] >
[Local updates] .
The updates screen appears.
5. Select the *.upg Help file and press OK.
A message appears displaying the update
status. Follow the on-screen instructions to
complete the update and restart your TV.
EN 36

Reinstall the TV

Reinstalling your TV resets all picture and
sound settings, and reinstalls all TV channels.
1. Press .
2. Select [Setup] > [TV settings] >
[Reinstall TV], then press OK.
3. Follow the on-screen instructions.