Advertisement
C
ONNECTING
AV I
NPUTS
The audio/video input jacks on the bottom panel of the TV are for
direct picture and sound connections between the TV and a VCR (or
similar device) that has audio/video output jacks.
1
Using an RCA type Video Cable, connect one end of the cable to
the Video (yellow) Out jack on the VCR or accessory device and
the other end to the AV Video In jack on the bottom of the TV.
2
Using an RCA type Audio Left and Right Cable, connect one end
to the left and right Audio Out L & R jacks (red & white) on the
VCR or accessory device and the other ends to the AV Audio In
L & R jacks on the bottom of the TV.
3
Turn the VCR or accessory device and the TV On.
4
Press the AV button on the remote control to show the Source
List menu on the TV screen.
5
Press the œ button repeatedly until AV is highlighted, then press
the π button to enter the selected Mode.
6
With the VCR (or accessory device) ON and a prerecorded
tape (CD, DVD, etc.) inserted, press the PLAY button to view
the tape on the television.
C
V
OMPONENT
IDEO
Component Video inputs provide the highest possible color and
picture resolution in the playback of digital signal source material,
such as with DVD players.
1
Connect the Component (Y, Pb, Pr) Video OUT jacks from the
DVD player (or similar device) to the CVI-1 VIDEO Input (Y
green, Pb blue, Pr red) jacks on the bottom of the TV.
2
Connect the red and white AUDIO CABLES to the Audio (left
and right) output jacks on the rear of the accessory device to the
CVI-1 Audio In L & R jacks on the bottom of the TV.
3
Turn the TV and the DVD player (or digital accessory device)
ON.
4
Press the AV button on the remote control to show the Source
List menu on the TV screen.
5
Press the œ button repeatedly until CVI-1 is highlighted, then
press the π button to enter the selected Mode.
6
Insert a DVD disc into the DVD player and press the PLAY
button on the DVD Player.
HD (H
D
IGH
EFINITION
If you are using a High Definition receiver that can transmit high
definition programming, the TV can except those signals through the
HD Inputs located on the bottom of the TV.
1
For Digital Connection, connect the HDMI connector of the
HD Receiver (or similar device) to the HDMI Input jacks on the
bottom of the TV.
OR
For Analog Connection, use Component Video cables to con-
nect the Component (Y, Pb, Pr) Video Out jacks of the HD
Receiver (or similar device) to the VGA adapter (supplied with
the TV). Connect the other end of the adapter to the VGA Input
jacks (CVI-2) on the bottom of the TV.
2
Connect the red and white audio cable to RCA type Audio
Cables. Connect the audio adapter to the PC Audio In L & R
jacks on the bottom of the TV.
3
Turn the TV and the HD Receiver ON.
4
Press the AV button on the remote control to show the Source
List menu on the TV screen.
5
Press the œ button repeatedly until HDMI or CVI-2 (SD/HD) is
highlighted, then press the π button to enter the selected Mode.
P
ERIPHERAL
I
(CVI)
NPUTS
) I
NPUTS
E
QUIPMENT TO THE
TUNE
AV
TO AV1
CHANNEL
VCR (or accessory device)
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
CVI
Jack Panel
Bottom of TV
ACCESSORY DEVICE EQUIPPED WITH
COMPONENT VIDEO OUTPUTS.
3
The description for the component video connectors may differ depending on the DVD player or accessory
digital source equipment used (for example, Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr, Cb). Refer to your DVD player or digital
accessory owner's manual for definitions and connection details.
HDMI
Digital
Connection
AUDIO
CABLES
HD RECEIVER
EQUIPPED WITH
COMPONENT
VIDEO OUTPUTS.
LCD T
ELEVISION
Jack Panel Bottom of TV
AUDIO IN
(RED/WHITE)
2
6
3
1
COMPONENT VIDEO
CABLES (Green, Blue, Red)
AUDIO CABLES
(RED/WHITE)
6
HELPFUL HINT
Analog
Connection
COMPONENT
VIDEO CABLES
(Green, Blue, Red)
Coxial Cable
Lead-in from
Cable Outlet,
Cable Converter
Box, or VHF/
UHF Antenna
VIDEO IN
(YELLOW)
2
Rear of HD
Receiver
(Illustration is
for reference
only. Your HD
Receiver's jack
panel may be
labeled differently.
Coaxial cable
Lead-in from
Satellite Dish
or Antenna
Advertisement
