Getting Started; Connect The Antenna; Connect The Mains; Remote Control - Philips 32PFL7602D/10 User Manual



Getting started

4.1 Connect the antenna
Insert the aerial plug firmly into the aerial
1
socket x at the bottom of the TV.
L R
HDMI 1 HDMI 2 75 DIGITAL AUDIO IN AUDIO OUT (DIGITAL) AUDIO OUT
COMMON INTERFACE
COMMON INTERFACE
COMMON INTERFACE
4.2 Connect the mains
Insert the mains cord supplied into the
1
mains at the bottom of the TV and in the
wall socket.
Warning
Verify that the mains supply voltage corresponds
to the voltage printed on the sticker at the rear
of the TV.
4.3 Remote control
Insert the 2 batteries supplied.
1
Be sure the (+) and (-) ends of the batteries line
up correctly (markings are printed in the case)
HDMI ANTENNA
For most keys pressing a key once will activate
the function. Pressing a second time will
undo the action.
4.4 Switch on the TV
Press the power switch B at the side of
1
the TV.
An indicator on the front of the TV lights up
and the screen comes on.
If the TV is in standby mode, press the -P+
2
keys or the B key on the remote control.
4.5 First time installation
The installation procedure consists of a series
of screens that will guide you through the
installation of your TV.
Follow the instructions on the screen.
Note
If the TV has already been installed before and/
or you want to change the First time installation
settings, proceed with Use of the 'TV menu
settings', p. 15.