Philips 32PFL7602D/10 User Manual page 52

The remote
control of
connected
equipment does
not work well
Occasional
appearance of
red, blue, green,
and black spots
on screen
No photo or
music play or in
poor quality
Unstable or not
synchronised
VGA picture
No solution found
for your picture
or sound problem
Red blinking led

• The infrared signals of the screen may influence the reception sensibility
of other peripherals.
• Solution: replace the batteries of the remote of other peripheral
equipment.
• The sympton is not a problem.
The liquid crystal panel is built with very high precision technology giving
you the fine picture details. Occassionally a few non-active pixels may
appear on the screen as a fixed point of red, blue, green, or black. Note
that this does not affect the performance of the set.
• Verify if the source complies with a supported code.
• Verify if you have selected the correct VGA mode in your PC.
See Connect a PC, p. 49.
• Verify the connections between the TV and the PC.
• Switch off your TV off and then on again once.
Never attempt to repair a defective TV yourself. Verify with your dealer
or call a TV technician.
• Unplug the mains cord and insert it in again.