R5VDPS 5 MP IP Varifocal IP 115 ft IR
Dome Camera Quick Installation Guide
This 5 MP IP security camera captures sharp high definition video images with a high-performance CMOS
sensor and 2.7 ~ 13.5 mm motorized varifocal lens. This camera features:
2592(H) × 1944(V) (5 MP) progressive scan CMOS sensor
•
Color 0.05lux @ F1.2 (AGC ON), B/W 0 lux @ IR ON minimum illumination
•
H.265 / H.264 video compression
•
2.7 ~ 13.5 mm (motorized) H.FOV: 116° ~ 34°
•
IR range up to 115 feet
•
Flip and Rotation image adjustments
•
3D DNR, Digital WDR, IR cut filter
•
IP66 weatherproof rating
•
Dome
assembly
Dome
assembly
screws (3)
IR LEDs
R5VDPS camera assembly
IR LEDs
Safety cable
(attached
to dome)
Dome
alignment
mark
Drop cable and cable channel
Camera (dome assembly removed)
www.observint.com
1
Camera
gimbal pivot
point
Mounting base
Holes for
mounting
screws (4)
Ethernet connector
(PoE capable)
Lens
* To reset the camera, press and hold down the Reset button for ten seconds while the camera is powering on.
What's in the box
Camera assembly
•
Waterproof Ethernet connector
•
Black liner
Mounting hardware
•
This instruction guide
•
Security L-wrench
•
Drill template
Camera gimbal
•
pivot point
Quick Installation Guide
•
Tools you need
Holes for
mounting
To install the camera, you will need:
screws (4)
12 Vdc power source or Ethernet PoE injector. See Specifications for wattage requirement.
•
Tools and additional fasteners (may be required) for mounting the camera
•
Phillips #2 screwdriver
•
Ethernet drop cable
•
12 Vdc power extension cable (if powering with 12 Vdc supply)
•
Installation
Mounting
base
Before installation:
Make sure that the device is in good condition and all the assembly parts are included.
•
Check the specification of the products for the installation environment.
•
Make sure that the wall or the ceiling is strong enough to withstand 3 times the weight of the camera.
•
To avoid fire or shock hazard, use only UL listed power supplies. Verify that the power supply will
•
provide the rated voltage and wattage for the camera. See the Specifications section.
Camera (dome assembly and liner removed) top view
12 Vdc Power
connector
Cables labeled for
function
Reset button*
Terminal functions
Camera drop cables
Mounting
base
Safety
cable
Holes for dome
assembly screws (3)
HDV_R5VDPS_CQ
190630
Need help?
Do you have a question about the R5VDPS and is the answer not in the manual?
Questions and answers