Advertisement
R8VTPS 8 MP IP Varifocal 150 ft IR
Turret Camera Quick Installation Guide
This 8.0 MP IP turret security camera captures sharp high definition video images with its 8 MP high-
performance CMOS sensor and 3.3 ~ 12 mm motorized varifocal lens. This cameras features:
3840 (H) × 2160 (V) (8 MP) progressive scan STARVIS CMOS sensor
•
H.265 / H.264 video compression
•
3.3 mm ~ 12 mm motorized varifocal lens providing a 105 ~ 37° horizontal field of view
•
Full-frame IR up to 150 feet
•
Flip and Rotation image adjustments
•
3D-DNR, True WDR, IR cut filter
•
IP66 weatherproof rating
•
Enclosure
Turret
R8VTPS camera assembly
Holes for
mounting
screws (3)
Tabs (2) hold
enclosure
Camera (turret assembly without trim ring) top view
www.observint.com
1
Mounting plate
Trim ring
Trim ring
Lens
Ethernet
connector
(with PoE)
Light
sensor
Clip plate
and screw
* To reset the camera, press and hold down the Reset button for ten seconds while the camera is powering on.
What's in the box
Camera assembly
•
Waterproof Ethernet connector
•
Mounting hardware
•
Security L-wrench
•
Drill template
•
Quick Installation Guide
•
Tools you need
To install the camera, you will need:
12 Vdc power source or Ethernet PoE injector. See Specifications for wattage requirement.
•
Tools and additional fasteners (may be required) for mounting the camera
•
Phillips #2 screwdriver
•
Ethernet drop cable
•
12 Vdc power extension cable (if powering with 12 Vdc supply)
•
Installation
Before installation:
Make sure that the device is in good condition and all the assembly parts are included.
•
Check the specification of the products for the installation environment.
•
Make sure that the wall or the ceiling is strong enough to withstand 3 times the weight of the camera.
•
Trim ring tab (3)
Slot in mounting plate
for trim ring tab (3)
Mounting side of mounting plate
12 Vdc Power connector
Cables labeled for function
Reset button*
Terminal functions
Camera drop cables
Drop cable
HDV_R8VTPS_CQ
190630
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HDVision R8VTPS
Summary of Contents for HDVision R8VTPS
- Page 1 R8VTPS 8 MP IP Varifocal 150 ft IR Trim ring tab (3) Mounting plate Turret Camera Quick Installation Guide Trim ring This 8.0 MP IP turret security camera captures sharp high definition video images with its 8 MP high- performance CMOS sensor and 3.3 ~ 12 mm motorized varifocal lens. This cameras features: Slot in mounting plate 3840 (H) ×...
-
Page 2: Step 1. Mounting The Camera
Step 1. Mounting the camera A R8VTPS camera can be mounted directly to a wall or ceiling. The surface should support at least three times the weight of the camera. The drop cables of this camera are normally routed through mounting surface. - Page 3 Click Modify, and then slide the Shift Bar to the right. The Status of the modify operation is In the screen above, click the download hyperlink. shown in the right-most column. In the following window, click Run in the footer menu, and then close your browser. Modify status Shift bar Follow the on-screen instructions to complete the installation off SurveillancePlugin.exe.
-
Page 4: Camera Adjustments
High security level as shown below, and then click OK. Copy the new password for the camera and Click to add camera save it in a safe place. To add a camera to a frame, click the icon in the upper right corner. In the Quick Add menu that opens, a list of cameras that can be added appears at the top. -
Page 5: Specifications
Pan adjustment: While observing video from the camera, rotate the enclosure with the turret to Specifications point the camera in the direction of your surveillance target. Model R8VTPS Pan: adjustment Resolution 3840 (H) × 2160 (V), 8MP 0° ~ 360°... - Page 6 Using the Waterproof Ethernet Fitting Install the Waterproof Ethernet Fitting on the Ethernet cable end at the camera when moisture or contamination exists in the area near the camera. The fitting includes several parts that must be installed in a specific order. To install the fitting: Place the rubber O-ring over the camera drop cable end cap.
Need help?
Do you have a question about the R8VTPS and is the answer not in the manual?
Questions and answers