Table of Contents
Advertisement
Clock
Clock
Settings
Time
Day
Source
Source
Settings
AV1
AV2
HDMI
Side
Center input
(Center In Vol.)
Demo
TV
Settings
Demo
Auto demo
Install
...........
Dealer demo
- Digital processing
- Light sensor
- 3D Y/C Comb filter
&
Select
with the cursor right and press the cursor down to select
Clock
or
.
Time
Day
é
With the cursor buttons, enter the correct time and day, which afterwards
can be selected with the
&
Select
with the cursor right.
Source
é
Press the cursor down to select one of the external AV inputs.
"
Press the cursor right to enter the list of types of devices attached to the
selected input.
'
Select the accessory device with the cursor up/down.
Once you have named the source, e.g.VCR, this source will automatically be
selected when your remote control is in VCR mode, see p. 3, and when you
press the
button on the remote control.
AV+
(
Press the
button on the remote control to turn off all menus on
MENU
screen.
§
on the remote control
Keep the
AV+
button
button repeatedly.
The Source Select menu appears in which you may select a source or
peripheral connected to be displayed on screen.
Center input - Center in volume
When you have connected a multichannel surround receiver to the TV, the
loudspeakers of the monitor can act as center speaker, making a separate
center speaker unnecessary.
Select
Center input On.
When having selected
On
cursor left/right to correct volume level differences of the external audio
receiver and speakers.
&
Select
Demo
in the Main menu with the cursor down.
é
Select
Auto demo
or one of the features with the cursor right and press
the
button on the remote control.
OK
If
Auto demo
has been selected the demo will automatically present all the
features sequentially in a loop. Press one of the cursor buttons to stop the
Auto demo.
If one of the features has been selected, this particular feature demo will run
one time only, until activated again, and the Demo menu will reappear.
Digital processing, Light sensor and 3D Y/C Comb filter On or Off
Select
Digital processing, Light sensor
to really see the difference in picture quality.
In Dealer Demo mode it is possible to change channels with
adjust the volume.
Note: the Dealer Demo is not part of the automatic sequence and can only be
activated separately.
button on the remote control, see p. 3.
CLOCK
pressed and then p
you can adjust the
Center In Vol.
and
3D Y/C Comb filter On
ress this
with the
or
Off
and to
- CH +
9
Advertisement
Table of Contents
