Annex 3: Configuring Your Network Settings Manually - Philips Cineos 37PF9730/10 User Manual

Annex 3 : Configuring your network settings manually
Attention: If you have problems or questions or if you feel you don't have sufficient knowledge about PC
connectivity and PC networking, please contact your PC or TV retailer to assist you.
TV menu
Installation
Languages
Country
Time zone
Channels
Manual network i..
Preferences
Connections
.............
Info
or automatic network
DHCP/Auto IP
addressing is a protocol used to automatically
connect network devices to a network. Please,
refer to your router or wireless access point's
hardware instructions to see if this is
supported.
Static (or fixed) IP address
address that your TV will always use to connect
to your home network.When DHCP/Auto IP is
not available, you can set a static IP address on
your TV.
A is used to define a subnet
Subnet mask
which is separated from all other networks by a
router. The subnet mask indicates which part of
the IP address is on the local network, and
which must go out through the router.
Manual network i...
View network sett...
Network mode
IP configuration
: This is an IP
This menu allows you to do the network installation
yourself and to determine your own network
configuration.
& Select Manual network installation
Installation menu.
Press the cursor right to enter the Manual network
é
installation menu.
According to your personal network setup, the
available menu items are present and can be
selected.
Read and follow the menu-info at the bottom of the
"
screen to execute the requested actions.
View network settings
This will display the current values of the network
parameters associated with the network.
Network mode
This allows you to select your network
configuration mode.
Choose
DHCP & Auto IP
configuration by your router or wireless access
point (preferred).
Choose
Static IP
network configuration. Proceed with IP
configuration.
IP configuration
This allows you to enter your IP configuration
settings if you selected Static IP in the Network
mode menu:
• : you are prompted to enter a fixed IP
IP address
address that the TV will use in your network.
Preferably choose one from the range:
192.168.0.xxx or
192.168.123.xxx or
10.0.0.xxx
• Subnet mask : you are prompted to enter the
subnet mask address of your network.
Enter the same subnet mask throughout your
network, e.g. 225.225.255.0
in the
for automatic network
for manually entering a static
13