Page 1
OccuSwitch DALI Commissioning Guide with the IRT8097...
Page 2
Switch lights on or off test Enable 100h. no dimming 100 h Commissioning of switches with D A L I Enocean RF technology ® address Contact Attention Always keep pointed to OccuSwitch DALI sensor Philips OccuSwitch DALI Commissioning Guide - IRT8097...
Page 3
Select function for this luminaire 100 h c = corridor D A L I address w = window Repeat for next flashing luminaire Press “DALI” to abort) When finished all luminaires flash once Philips OccuSwitch DALI Commissioning Guide - IRT8097...
Page 4
Press “test” to stop 100 h (automatic stop after 60s D A L I no movement) address Switch lights on or off Press “on” www.philips.com/omniprog Press “off ” test 100 h D A L I address Philips OccuSwitch DALI Commissioning Guide - IRT8097...
Page 5
OccuSwitch DALI will function normally and 100h counter will be reset. 1-10 on/off mode power up background IR group basics save D A L I address min. power up power up mode ? test Philips OccuSwitch DALI Commissioning Guide - IRT8097...
Page 6
LEDs start to flash rapidly. Wait till the flashing slows down. Press one of the keys of the switch you want to bind to the OccuSwitch DALI. Press 0 or 1 Function = window + corridor control...
Page 7
Philips OccuSwitch DALI Commissioning Guide - IRT8097...
Page 8
Contact Philips Lighting B.V. www.philips.com/omniprog www.philips.com/occuswitchdali Although this information has been prepared with extreme care, no rights can be derived from any information and illustration in this manual. 3222 636 49141 December 2010...
Need help?
Do you have a question about the OccuSwitch DALI and is the answer not in the manual?
Questions and answers