Hunter 51060 Quick Start Manual page 6

Switch Housing
Partially install two of the
switch housing screws found in
the bag. Connect the plugs
from the upper and lower switch
housings. Make sure to line up
the colored markings on the
plug connectors.
Switch Housing (continued)
Align the notches in the sides of
the lower switch housing with
the screws on the upper switch
housing. Twist the lower switch
housing clockwise to lock into
place. Install the third switch
housing screw. Tighten all three
screws securely.
11
M0047-01 • 11/26/12 • © Hunter Fan Company
Maintenance, Operation & Cleaning
The pull chain controls the fan:
high, medium, low, and off.
12
M0047-01 • 11/26/12 • © Hunter Fan Company
www.HunterFan.com
Connect the fan pull chain
pendant to the short chain
coming from the switch housing.
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light xture falling.
www.HunterFan.com
Reverse
Switch
Changing the direction of air
ow - move the reverse switch
to the opposite position.
1.888.830.1326
ON
1.888.830.1326
Cleaning the fan - use soft
brushes or cloths to prevent
scratching. Cleaning products
may damage the nishes.