Lan - Toshiba L40 Series User Manual

1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Do not pull on the cable or move the computer while the cable is
connected.
If you use a storage device such as an optical media drive or hard disk
drive connected to a 16-bit PC Card, you may find that the modem speed
is slow or the communication session might be interrupted.
If you find that the modem speed is low or communication is interrupted
when you are using the modem, set the CPU speed to Maximum within the
Power Options.
Disconnecting
To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. Disconnect the cable from the computer in the same manner.

LAN

The computer is equipped with networking hardware that supports Ethernet
LAN (10 megabits per second, 10BASE-T), and Fast Ethernet LAN
(100 megabits per second).
Do not install or remove an optional memory module while the Wake-up on
LAN feature is enabled.
The Wake-up on LAN feature does not work on battery power, you should
always leave the computer connected to the AC adapter if you are using
this feature.
User's Manual
Basic Operations
4-5