Using Hibernation; Enabling The Hibernation Command; Going Into Hibernation Mode - Toshiba Satellite A45 Series User Manual

Using Hibernation

When Hibernation is enabled, you can put the computer into
Hibernation in more than one way.

Enabling the Hibernation command

Hibernation enabled is a default setting. If it should become
disabled, you can enable it by right-clicking the Power Saver
icon in the system tray.

Going into Hibernation mode

If you are using the Windows
or are using the Windows
not a member of a domain, power off the computer using the
Hibernation command as follows:
1 Click Start, Turn off computer.
The Turn off computer window appears.
Sample Turn off computer window with shift key held down to
show Hibernate option
2 Hold down the shift key and click Hibernate
("Hibernate" only appears when the shift key is pressed).
For more information about the Power Saver utility, see
"Power Management" on page
Learning the Basics
Using Hibernation
196.
®
XP Home operating system,
®
XP Pro operating system and are
109