Page 1 Satellite A40/A45 Series User’s Guide If you need assistance: ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 201 in this guide. Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 2 If you fail to do so, this product may not function properly and you may lose data or suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE.
Page 3: Fcc Notice
Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and...
Page 4: Industry Canada Requirement
Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 Alarm equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Instructions for IC CS-03 certified equipment NOTICE: The Industry Canada label identifies certified equipment.
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Regulatory Information
Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9 Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit etre utilize a l'interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence.
Page 10 This device may not cause harmful interference. ❖ This device must accept any interference that may cause undesired operation. TOSHIBA is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this TOSHIBA...
Page 11 Caution: Exposure to Radio Frequency Radiation The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas. The both of antenna types, when installed are located at the upper edge of the LCD screen.
Page 12 Taiwan Article 14 Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design. Article 17 Any use of low power radio frequency electric machinery shall not affect the aviation safety and interfere with legal communications.
Page 13: Device Authorization
The interference range of this equipment is less than 40m. This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. TOSHIBA Direct PC Monday – Friday: Toll Free Tel: Direct Dial:...
Page 14: Interference Statement
❖ Consult the dealer or an experienced radio/TV technician for help. Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by Toshiba.
Page 15 This device works on passive scan only. A peer-to-peer mode is not available in 802.11a and Turbo Mode. 802.11b (2.4GHz) Australia Canada France Ireland Luxembourg Norway Switzerland 802.11a (5GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5GHz) Canada Austria Denmark Germany...
Page 16 Approved Countries/Regions for use for the Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 17: Bluetooth Wireless Technology Interoperability
New Zealand Portugal Sweden Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖...
Page 18: Bluetooth Wireless Technology And Your Health
Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the United States for...
Page 19: Regulatory Statements
In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include: ❖ Using the equipment with Bluetooth wireless technology on board of airplanes, or ❖...
Page 20 The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 21 The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations. Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery. Using this equipment in Japan In Japan, the frequency bandwidth of 2,400-2,483.5 MHz for second generation low-power data communication systems such as this equipment...
Page 22 3. TOSHIBA Direct PC Monday – Friday: Toll Free Tel: Direct Dial: Fax: Device Authorization This device obtains the Technical Regulation Conformity Certification, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law of Japan.
Page 23 This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 24 LapLink is a registered trademark of Traveling Software, Inc. TouchPad is a trademark of Synaptics, Inc. Wi-Fi is a trademark of the Wireless Capability Ethernet Alliance. Bluetooth is a trademark owned by its proprietor and used by Toshiba under license. PS/2 is a registered trademark of IBM, Inc.
Page 25 All other brand and product names are trademarks or registered trademarks of their respective companies. Computer Disposal Information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org.
Page 26: Table Of Contents
Keeping yourself comfortable ... 42 Precautions... 45 Setting up your computer ... 46 Setting up your software... 47 Registering your computer with Toshiba ... 47 Adding external devices ... 48 Connecting to a power source ... 49 about your CPU cooling fan ... 41...
Page 27 Opening the display panel ... 52 Turning on the power... 53 Activating the power-on password... 54 Using the TouchPad™ ... 55 Using TOSHIBA Touch and Launch... 58 Setting up a printer ... 62 Installing additional memory (optional) ... 65 Removing a memory module... 72 Connecting a mouse ...
Page 28 Contents Windows Overlay keys... 86 Emulating a full-size keyboard ... 88 Starting a program... 88 Saving your work ... 89 Printing your work ... 90 Backing up your files ... 90 Using the DVD-ROM or Multifunction drive ... 91 DVD-ROM drive components... 92 CD/DVD control buttons ...
Page 29 Going into Standby mode more quickly ... 114 Starting again from Standby ... 116 Chapter 3: Mobile Computing ... 117 Toshiba’s energy-saver design ... 117 Running the computer on battery power ... 117 Battery Notice ... 118 Power management ... 118 Using additional batteries ...
Page 30 Contents Lesson 3: Learning about the Internet ... 139 Lesson 4: Creating a new document ... 140 Lesson 5: Creating a new folder... 141 Lesson 6: Starting programs ... 142 Lesson 7: Resizing, repositioning, and hiding windows ... 144 Using the taskbar ... 145 Minimizing and maximizing windows ...
Page 31 Surfing the Internet... 177 Internet features... 178 Uploading and downloading files on the Internet ... 178 Toshiba’s online resources... 179 Exploring video features ... 179 Changing the display properties setting ... 179 Playing DVDs ... 180 Display settings hot key ... 181 Exploring audio features ...
Page 32 Contents Using SD Cards... 186 Inserting an SD card ... 186 Removing an SD card ... 187 Chapter 6: Toshiba Utilities ... 188 TOSHIBA Accessibility ... 188 Fn-esse ... 190 Starting Fn-esse... 190 Assigning a key to a program or document ... 191 Viewing existing key assignments...
Page 33 Develop good computing habits ... 227 If you need further assistance... 228 Before you call ... 228 Contacting Toshiba ... 229 Other Toshiba Internet Web sites ... 230 Toshiba’s worldwide offices ... 230 Appendix A: Hot Keys... 233 Volume Mute... 233 Instant password security...
Page 34 Contents Appendix C: Using ConfigFree With Your Computer ... 242 Getting Started... 243 ConfigFree Main Screen ... 243 Starting ConfigFree ... 244 Configuring ConfigFree ... 244 ConfigFree Utilities... 245 Connectivity Doctor ... 245 Device Settings ... 246 Profile Settings ... 248 Quick Connect...
Page 35: Introduction
You will find your operating system, Microsoft Windows XP, already installed on your computer. Your operating system offers exciting features and easy Internet access. This guide contains information about your operating system and how it functions with your Toshiba computer. For...
Page 36: This Guide
For more detailed information about the features and specifications on your particular model, please visit Toshiba's Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice.
Page 37: Safety Icons
Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not DANGER...
Page 38: Other Icons Used
❖ Guides for other programs that may come preinstalled on your computer and for additional programs on your Recovery Media. ❖ For accessory information, visit Toshiba's Web site at toshiba.com ❖ The Microsoft documentation which explains the features of the operating system.
Page 39: Service Options
Introduction Service options Service options Toshiba offers a full line of service options built around its ® SelectServ limited warranty programs. For more information, visit Toshiba’s Web site at toshiba.com If you have a problem or need to contact Toshiba, see “If...
Page 40: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 41: Important Information About Your Cpu Cooling Fan
❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones. ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters.
Page 42: Keeping Yourself Comfortable
Getting Started Selecting a place to work Keeping yourself comfortable Strain and stress injuries are becoming more common as people spend more time using their computers. With a little care and proper use of the equipment, you can work comfortably throughout the day. This section provides hints on avoiding strain and stress injuries.
Page 43 Below eye level Footrest Correct posture and positioning of the computer Whichever type you choose, use the following guidelines to adjust your chair for maximum computing comfort. ❖ Position your chair so that the keyboard is at or slightly below the level of your elbow. You should be able to type comfortably with your shoulders relaxed and your forearms parallel to the floor.
Page 44 Getting Started Selecting a place to work Lighting Proper lighting can improve the visibility of the display and reduce eyestrain. ❖ Position the display panel or external monitor so that sunlight or bright indoor lighting does not reflect off the screen.
Page 45: Precautions
❖ Avoid performing repetitive activities for long periods. Intersperse such activities with other tasks. ❖ Focusing your eyes on your computer screen for long periods can cause eyestrain. Look away from the computer frequently and focus your eyes on a distant object for at least 30 seconds.
Page 46: Setting Up Your Computer
Getting Started Setting up your computer ❖ Never turn off the computer if a drive light indicates a drive is active. Turning off the computer while it is reading from or writing to a disk may damage the disk, the drive, or both. ❖...
Page 47: Setting Up Your Software
To register online, your computer’s modem must be connected to a voice-grade telephone line. If you chose not to register now, you may register with Toshiba by clicking the Register with Toshiba icon on the desktop. A window will display the message, “Thank you.”...
Page 48: Adding External Devices
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba Web site at www.register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.”...
Page 49: Connecting To A Power Source
Sample power cable and sample AC adapter Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter.
Page 50 Getting Started Connecting to a power source Connecting the power cable to the sample AC adapter Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Plug the AC adapter into the DC-IN.
Page 51: Charging The Main Battery
Damaged power cables can cause fire or electric shock. Never modify, forcibly bend, place heavy objects on top of, or apply heat to the power cable. If the power cable becomes damaged or the plug overheats, discontinue use. There is a risk of electric shock. Never remove the power plug from the outlet with wet hands.
Page 52: Using The Computer For The First Time
Getting Started Using the computer for the first time Battery life and charge time may vary depending on the applications, power management settings, and features used. Using the computer for the first time Opening the display panel Slide the display latch to the right and lift the display panel Opening the display panel To avoid damaging the display panel, do not force it beyond the point where it moves easily.
Page 53: Turning On The Power
Turning on the power Check that all the drives are empty. Turn on the computer by pressing the power button, located above the keyboard, until the on/off light changes to green. Pressing the power button When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.
Page 54: Activating The Power-On Password
If the password is incorrect, you will be prompted to try again. If you forget your power-on password and therefore cannot turn on your computer, take your computer to a Toshiba authorized service center for help. “TOSHIBA Console” on page key.
Page 55: Using The Touchpad
After the third incorrect password submission, the system automatically shuts down. Using the TouchPad The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you’d like to move the cursor: ❖...
Page 56 Getting Started Using the computer for the first time Control buttons The control buttons are below the TouchPad and are used like the buttons on a mouse. The primary control button is the button on the left and corresponds to the left mouse button. To double-click, press the primary button twice in rapid succession.
Page 57 Using the computer for the first time Sample Mouse Properties window Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes. Close the Printers and Other Hardware window. Close the Control Panel window. You can also use a hot key to disable or enable the TouchPad. “Disabling or enabling the TouchPad”...
Page 58: Using Toshiba Touch And Launch
A blue circle within the TOSHIBA Touch and Launch window represents your finger location on the TouchPad. As you move the blue circle over an icon in the TOSHIBA Touch and Launch window, the icon is highlighted or selected. Release your finger from a selected icon to choose the icon's function.
Page 59 To close the TOSHIBA Touch and Launch window, release your finger when the blue circle is not on any icon. Or, highlight the Close icon in the upper right of the TOSHIBA Touch and Launch window. The TOSHIBA Touch and Launch window has the following...
Page 60 TOSHIBA Touch and Launch is controlled/adjusted via an icon on the system tray. The icon will change color when the TOSHIBA Touch and Launch is active. Double-click the icon to open the TOSHIBA Touch and Launch Settings window. Right-click the icon to see the following shortcut menu: ❖...
Page 61 Sample TOSHIBA Touch and Launch Settings window In the Corner Assignment section you can change the icons you see at the four corners of the TOSHIBA Touch and Launch window using the drop-down list boxes. The icons are referred to as tables in the TOSHIBA Touch and Launch Settings dialog.
Page 62: Setting Up A Printer
The Option button allows you to define how folders will open, define visual affects and control when to show help. A list of tables appears in the Table section of the TOSHIBA Touch and Launch Settings window. These are the same items (icons) you can choose in the Corner Assignment section of the TOSHIBA Touch and Launch Settings.
Page 63 Using the computer for the first time Using the Add Printer Wizard The Add Printer Wizard may be needed by older printers or printers shared on a network. To set up a printer with the Add Printer Wizard: Click Start, Control Panel. The Control Panel appears.
Page 64 Getting Started Using the computer for the first time Sample Printers and Faxes window Click Add a printer. The Add Printer Wizard window appears. Sample Add Printer Wizard...
Page 65: Installing Additional Memory (Optional)
You may want to increase the computer’s memory if you use complex software or process large amounts of data. Additional memory comes in various capacities (visit Toshiba’s Web site at are two memory slots. Your system may have both slots occupied. Installing additional memory (optional) for more information).
Page 66 Getting Started Installing additional memory (optional) If you use the computer for a long time, the memory modules will become hot. If this happens, let the modules cool to room temperature before you replace them. Do not try to install a memory module under the following conditions.
Page 67 Installing additional memory (optional) Open the display panel and remove the panel above the keyboard that contains the power button. When removing the computer’s power button panel to install additional memory, be careful not to damage the display or circuit board. Using a flat-head screwdriver to pry off the panel You can pry off the panel by using a flat-head screwdriver.
Page 68 Getting Started Installing additional memory (optional) Removing the panel above the keyboard The brace sits in the center of the area exposed when the panel is removed. Observe how the keyboard retaining brace is positioned before you remove it. Store the brace with the screws for safekeeping. Removing a keyboard screw...
Page 69 Installing additional memory (optional) Lift the keyboard and gently place it face down on the palm rest of the computer. Lifting the keyboard Removing the keyboard exposes the two memory slots, which are covered by a plastic sheet. Covered memory module slots Locating the covered memory module slots...
Page 70 Getting Started Installing additional memory (optional) Lift (but don’t detach) the plastic sheet to expose the memory slots. Lifting the plastic covering the memory slots Remove the new memory module from its antistatic packaging. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 71 Installing additional memory (optional) Insert the memory module in a slot. After ensuring the cutout in the module aligns with the tab in the memory module slot, gently press the module down into place. Inserting the memory module The clips on either side of the module will click to secure the module.
Page 72: Removing A Memory Module
Getting Started Installing additional memory (optional) When the panel is properly positioned, it will snap down into place. Turn on the computer. To verify that the computer correctly recognizes the memory, see If the computer does not recognize the memory, shut down the computer, remove the keyboard and make sure the memory module is seated properly, as described in step 7.
Page 73 Installing additional memory (optional) Pull the clips away from the memory module. The memory module pops partially out of the slot. Pulling the clips away from the memory module Carefully remove the module from the slot. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 74 Getting Started Installing additional memory (optional) Removing the memory module Complete the procedure by following steps 8 through 13 “Installing additional memory (optional)” on page Checking total memory When you add or remove memory, you can check that the computer has recognized the change. To do this: Click Start, Control Panel Click Performance and Maintenance.
Page 75: Connecting A Mouse
Connecting a mouse You may want to use a mouse instead of the TouchPad, the computer’s built-in pointing device. To connect a USB mouse, plug the mouse cable into one of the USB ports. Connecting a printer You can connect a USB-compatible printer to your computer through the USB ports.
Page 76: Using External Display Devices
Getting Started Using external display devices Using external display devices Your computer comes with a built-in LCD display, but you can easily attach an external monitor to your computer if you need a larger screen. Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously.
Page 77: Adjusting The Quality Of The External Display
❖ External device only Release the TECHNICAL NOTE: You can also change these settings using the Display Properties box in the Control Panel. Adjusting the quality of the external display To obtain the best picture quality from your external display device, you may need to adjust the video settings.
Page 78: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive ❖ If you use the display hot key ( display output with the LCD Display Stretch option enabled and the Display area (resolution) set to 640 x 480 or 800 x 600, the image on the internal display panel may appear stretched.
Page 79: Using An External Keyboard
Diskette drive LED Sample diskette drive Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer provided that the keyboard is USB-compatible. To connect a keyboard, attach its cable to one of the computer’s USB ports.
Page 80: Caring For Your Computer
Getting Started Caring for your computer ❖ Use the Shut down command if you are using the Windows connected to a domain server. ❖ If you have work in progress and are not connected to a network, use the Windows commands to save your system settings to memory so that, when you turn on the computer again, you will automatically return to where you left off.
Page 81: Cleaning The Computer
You can purchase a carrying case from your Toshiba dealer or at Toshiba’s Web site at Using a computer lock You may want to secure your computer to a heavy object such as your desk.
Page 82 Getting Started Caring for your computer PORT-Noteworthy To secure the computer: Loop the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. Pass the locking end through the loop.
Page 83: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter lists some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work temporarily stays in the computer’s memory until you save it to the disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Page 84: Using The Keyboard
Learning the Basics Using the keyboard ❖ Back up your files to storage media on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 85: Character Keys
Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The spacebar creates a space character instead of just passing over an area of the page. ❖ The lowercase l (el) and the number 1 are not interchangeable.
Page 86: Windows Special Keys
Learning the Basics Using the keyboard Windows special keys ® ® Windows special keys The keyboard provides two keys that have special functions in the operating system: ❖ The Windows ❖ The Application key has the same function as the secondary TouchPad control button (or secondary mouse button).
Page 87 Using the numeric keypad overlay To turn on the numeric keypad overlay, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on.
Page 88: Emulating A Full-Size Keyboard
Learning the Basics Emulating a full-size keyboard To turn off the cursor control overlay, hold down the and press keyboard indicator panel goes out. Emulating a full-size keyboard Although the computer’s keyboard layout is compatible with a standard full-size keyboard, it has fewer keys. Pressing the of the specially marked keys allows you to emulate a full-size keyboard.
Page 89: Saving Your Work
Saving your work Before you turn off the computer, save your work to the hard disk drive. Always save your data even when you are using Standby mode. If your battery fully discharges, your information will be lost. Your computer can be configured to warn you when the battery is running low.
Page 90: Printing Your Work
Learning the Basics Printing your work Printing your work Verify that the Windows your printer as described in TECHNICAL NOTE: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the operating system to run with the additional printer(s).
Page 91: Using The Dvd-Rom Or Multifunction Drive
Using the DVD-ROM or Multifunction drive Double-click the folder that contains the file, then click the file you want to copy. HINT: You can use the file. To select multiple consecutive files, hold down the key and click the first and then the last file (all files within that range will be highlighted).
Page 92: Dvd-Rom Drive Components
Learning the Basics Using the DVD-ROM or Multifunction drive For these reasons, your computer may come with a DVD- ROM or multifunction drive. TECHNICAL NOTE: Your DVD-ROM or multi-function drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region.
Page 93: Cd/Dvd Control Buttons
Using the DVD-ROM or Multifunction drive Never press the eject button or turn off the computer while the drive-in-use indicator light is glowing. Doing so could damage the disc or the drive. The eject button requires power to operate. The manual eject button does not require power.
Page 94: Cd/Dvd And Digital Audio Modes
Learning the Basics Using the DVD-ROM or Multifunction drive The stop/eject button stops a disc that is currently playing. If you have set a password for logging onto your system, your computer will start up and you will need to log on before being able to play a CD or DVD.
Page 95: Inserting A Disc
Using the DVD-ROM or Multifunction drive Inserting a disc Before playing an audio CD, turn the volume down. Playing the compact disc at maximum volume could damage your ears. To turn the volume down, access the Volume Control program (click Start, All Programs, Accessories, Entertainment, Volume Control), or use the volume control dial.
Page 96 Learning the Basics Using the DVD-ROM or Multifunction drive Inserting a disc Be careful not to touch the drive’s lens (located underneath the drive’s spindle) or the area around it. Doing so could cause the drive to malfunction. Gently press the center of the disc onto the spindle until it locks into place.
Page 97: Playing An Audio Cd
Learning the Basics Using the DVD-ROM or Multifunction drive Playing an audio CD Insert an audio CD and close the disc tray. The computer automatically detects a disc in the drive and opens the Audio CD window. To play an audio CD select the Play Audio CD using Windows Media Player option and click OK.
Page 98 Learning the Basics Using the DVD-ROM or Multifunction drive The Windows Media Rewind Play Stop Previous track Next track Sample Windows Media The Windows Media an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/Pause button on the CD Player control panel.
Page 99: Viewing The Contents Of A Cd Or Dvd
Using the DVD-ROM or Multifunction drive Viewing the contents of a CD or DVD CDs and DVDs contain files just like diskettes and the hard disk. CDs are often used to install software or store files that require lots of space, such as photographs and large presentation files.
Page 100: Removing A Disc With The Computer Off
Learning the Basics Setting up for communications Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject button access hole. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
Page 101: Connecting The Modem To A Phone Line
Actual data transmission speeds will vary depending on line conditions. For more information regarding your computer’s modem, visit Toshiba’s Web site at pcsupport.toshiba.com. Attach one end of a standard RJ-11 telephone cable to the modem port.
Page 102: Powering Down The Computer
Learning the Basics Powering down the computer To use a dial-up connection, have your network administrator configure your computer for the network and supply you with the telephone number for the dial-up connection. To set up the network connection, use the Dial-Up Networking Wizard: Click Start and point to All Programs.
Page 103: Turn Off Or Shut Down Command
Each option has its advantages. TECHNICAL NOTES: Before using any of these options to power down your computer, save your files and make sure the disk activity lights are off. If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again.
Page 104: Hibernation Command
Learning the Basics Powering down the computer Hibernation command The Hibernation command shuts the computer down completely, but it first saves the current state of the computer to the hard disk. Since Hibernation mode does not require power to maintain the saved information, the system settings are retained indefinitely.
Page 105: Using Turn Off Or Shut Down
Factors when choosing Standby: ❖ While in Standby mode, the computer uses some battery power. The battery will eventually discharge in Standby mode. If the battery discharges, your data will be lost if you do not save your work before entering Standby mode.
Page 106 Learning the Basics Using Turn Off or Shut down Sample Turn off computer window Click Turn Off. The computer turns itself off. If you are using the Windows are a member of a domain, power off the computer as follows: Click the Start button, then Shut down.
Page 107: Turning Off Or Shutting Down More Quickly
In addition to the method described above, you can turn off or shut down the computer by pressing the power button. To do so, you must preset the mode in Toshiba’s Power Saver utility. Open the Start menu, click Control Panel, then Performance and Maintenance.
Page 108: Starting Again After Turn Off Or Shut Down
Learning the Basics Using Turn Off or Shut down Sample TOSHIBA Power Saver Properties window Select Shut down for the options you want. ❖ When I press the power button Set this option to Shut down to have the computer shut down when you press the power button.
Page 109: Using Hibernation
Using Hibernation When Hibernation is enabled, you can put the computer into Hibernation in more than one way. Enabling the Hibernation command Hibernation enabled is a default setting. If it should become disabled, you can enable it by right-clicking the Power Saver icon in the system tray.
Page 110: Going Into Hibernation Mode More Quickly
Learning the Basics Using Hibernation The computer saves the state of the system, including all open programs and files, to the hard disk. Then the computer turns itself off. If you are using the Windows are a member of a domain, power off the computer using Hibernation as follows: Click Start, Shut Down.
Page 111 Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties window Select Hibernation for the options you want. ❖...
Page 112: Starting Again From Hibernation Mode
Learning the Basics Using Standby Click OK. The computer is now set to automatically go into Hibernation when your option settings occur. For more information about the Power Saver utility, see “Power Management” on page Starting again from Hibernation mode To start the computer from Hibernation mode, press and release the power button.
Page 113 The Turn off computer window appears. Sample Turn off computer window Click Stand By. The computer saves the state of all open programs and files to memory, turns off the display, and goes into a low-power mode. The on/off light ( machine is in Standby mode.
Page 114: Going Into Standby Mode More Quickly
To put the computer into Standby mode when you press the power button or close the display panel, you must preset the mode: Open the Start menu, click Control Panel then Performance and Maintenance. Click the Toshiba Power Saver icon. Fn + F3. 237.
Page 115 Click the Setup Action tab. The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties window Select Standby for the options you want. ❖ When I press the power button Set this option to Standby to put the computer into Standby mode when you press the power button.
Page 116: Starting Again From Standby
Learning the Basics Using Standby Starting again from Standby To start the computer from Standby mode, press the power button. The computer returns to the screen you were using. If you put the computer in Standby mode by closing the display panel, you can start it again by opening the display panel.
Page 117: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 118: Battery Notice
For optimum DVD performance, Toshiba recommends that you play DVDs while running on AC power rather than on battery power.
Page 119: Using Additional Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at toshiba.com. Charging the main battery To charge the battery, plug the computer into a live wall outlet.
Page 120: Charging The Rtc Battery
Mobile Computing Charging the batteries computer off. It takes much longer to charge the battery while the computer is on. TECHNICAL NOTE: The battery does not charge while the computer is consuming full power. The battery may not start charging immediately if: ❖...
Page 121: Monitoring Battery Power
To recharge the RTC battery, connect the computer and leave it powered on for 24 hours. The above error message may vary by computer model. The RTC battery does not charge while the computer is turned off even when the AC adapter is charging the computer. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date, or stop working.
Page 122: Determining Remaining Battery Power
To show remaining power: Open the Start menu, click Control Panel then Performance and Maintenance. Click the Toshiba Power Saver icon. The Toshiba Power Saver Properties window appears. Sample Toshiba Power Saver Properties window...
Page 123: Conserving Battery Power
❖ Enable Standby or Hibernation, which saves power when you turn off the computer and turn it back on again. ❖ Use Toshiba’s power-saving options. Mobile Computing Monitoring battery power ® operating system has additional power 196.
Page 124: What To Do When The Battery Runs Low
Toshiba has combined these options into preset power profiles. Using one of these profiles lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs.
Page 125: Changing The Main Battery
To change the default alarm settings: Open the Start menu, click Control Panel then Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. Select the Alarm settings in the Setup Alarm section. Changing the main battery When your battery power is running low, you have two options—connect the computer to an AC power source or...
Page 126 Mobile Computing Changing the main battery Remove all cables connected to the computer. Close the display panel and turn the computer upside down with the front side of the computer facing you. Move the battery release lock toward you (and the front of the computer) to move the battery release latch.
Page 127: Inserting The Battery In The Computer
While still holding the release latch in the open position lift the battery pack out of the computer. Removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in Inserting the battery in the computer Assuming you just removed the battery pack (see...
Page 128: Taking Care Of Your Battery
❖ Charge the battery only in the computer or in a battery charger designated as an approved option. ❖ When you install the battery pack, you should hear a click when it is seated properly. toshiba.com...
Page 129: Maximizing Battery Life
❖ Do not expose the battery pack to fire. The battery pack could explode. Maximizing battery life To maximize the life of your battery pack: ❖ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.
Page 130: Disposing Of Used Batteries Safely
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them. Under federal, state and local laws, it may be illegal to dispose of old batteries by placing them in the trash.
Page 131 ❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, and compact discs. Contact your authorized Toshiba representative for more information.
Page 132: Chapter 4: Getting To Know The Windows
Chapter 4 Getting to Know the Windows System This chapter introduces the Windows by guiding you through a few basic tasks. If you have used a Windows will find the Windows Whether you have used a Windows the skill and confidence you will gain from this chapter will more than offset the short amount of time spent going through these lessons.
Page 133: Lesson 1: Exploring The Desktop
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop The desktop is the launching pad for everything you can do in the Windows start programs, find documents, set up system components, and perform most other computing tasks. Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, shortcut tray, taskbar, system tray, and...
Page 134 The icons initially displayed on your system desktop include: Toshiba Access—Opens a window with links to software updates, services and support, and other important benefits. Recycle Bin—Holds files you have deleted using the Windows Explorer.
Page 135: Windows ® Xp File System
Getting to Know the Windows ® XP Operating System ❖ Search for files ❖ Access Windows Help and Support Center ❖ Run programs ❖ Suspend system activity and shut down the computer For more information on starting programs, see Starting programs” on page Taskbar Each time you open a program, a button associated with that program appears on the taskbar.
Page 136: Lesson 2: Using The Touchpad And Control Buttons Together
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together the files and folders reside in your computer on a storage device, such as a disk drive. You can think of your computer storage system in terms of office equipment.
Page 137 Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together Click an empty area of the desktop to close the Start menu. With the pointer in an empty area of the desktop, click the secondary button (the right-hand button) to open the desktop shortcut menu.
Page 138 Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together Now click the Close button in the upper-right corner of this window. The operating system closes the My Computer window. If the taskbar is locked, you need to unlock it. To unlock the taskbar, place the cursor on the taskbar and click the secondary button.
Page 139: Lesson 3: Learning About The Internet
Getting to Know the Windows ® XP Operating System HINT: You can move the taskbar to any of the desktop’s four edges. Click the taskbar once again and drag it back to the bottom of the desktop. Lesson 3: Learning about the Internet This lesson demonstrates how to access a Web page from a window and from the taskbar.
Page 140: Lesson 4: Creating A New Document
Getting to Know the Windows ® XP Operating System Lesson 4: Creating a new document Sample My Computer window Lesson 4: Creating a new document This lesson teaches you how to create a text file without having to first open a program. Move the pointer to an empty area of the desktop, then click the secondary button.
Page 141: Lesson 5: Creating A New Folder
Getting to Know the Windows ® XP Operating System Notice that when the document opens, there is a new button on the taskbar that reads My New Doc- Notepad (the name may be too long to fit into the taskbar space but, if you point to the name, the complete name is visible).
Page 142: Lesson 6: Starting Programs
Getting to Know the Windows ® XP Operating System Lesson 6: Starting programs Close the Notepad document you just created by clicking the Close button on the right side of the Notepad title bar. The operating system displays the document as an icon on the desktop.
Page 143 Getting to Know the Windows ® XP Operating System Click Paint. The operating system opens Paint—a basic drawing program. Sample Paint window To launch Windows Click Start, then point to All Programs. Click Windows Explorer. The operating system opens Windows provides access to all your computer’s resources.
Page 144: Lesson 7: Resizing, Repositioning, And Hiding Windows
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Sample Windows Explorer window Notice the taskbar now has two buttons on it—one for Paint and one for Windows To re-display the Paint program, click the Paint button on the taskbar.
Page 145: Using The Taskbar
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows This lesson introduces several ways to adjust the size, shape, and position of windows open on the desktop. Using the taskbar If you have applications open on the desktop, you can rearrange them by pointing to the taskbar using the TouchPad and clicking the secondary button.
Page 146: Resizing And Moving Windows
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Click the Maximize button in the top-right corner of the Paint window. The Paint window expands to fill the screen, hiding everything except the taskbar. Notice that the Maximize button has changed.
Page 147: Lesson 8: Closing Programs
Getting to Know the Windows ® XP Operating System Repeat steps Windows Explorer, placing it on the right side of the desktop. Now that the windows are side by side, you can see how you could refer to one window while working in the other.
Page 148: Lesson 9: Creating Shortcuts
Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts This lesson teaches you how to close the programs you opened earlier in this tutorial. To close the programs: Click the Close button at the top-right of the Explorer window.
Page 149: Creating A Shortcut To The Character Map
Getting to Know the Windows ® XP Operating System Click New, then click Shortcut. The operating system displays the Create Shortcut dialog box. Sample Create Shortcut dialog box In the Command line box, type and click Next. The operating system prompts you to select a name for the shortcut.
Page 150 Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts Sample Search options on the Start menu Click All Files and Folders. The operating system displays the Search Results dialog box. Sample Search Results dialog box...
Page 151: Lesson 10: Changing The Screen Saver
Getting to Know the Windows ® XP Operating System HINT: Search also allows you to perform searches on the Internet. Type char and then click Search. The operating system displays a list of all the files with “char” in their names. Click the Character Map file with the secondary button and drag it to the desktop.
Page 152 Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver The operating system treats all windows, icons, programs, drives, etc. as self-contained objects, each with its own set of properties (such as size, position on-screen, and color). Many of these properties can be customized to meet your particular needs and tastes.
Page 153 Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver Sample Display Properties dialog box Click the Screen Saver tab. Click the arrow beside the current option to open the screen saver list box. Scroll through the screen saver options by clicking the scroll arrows in the list box.
Page 154: Lesson 11: Setting The Date And Time
Getting to Know the Windows ® XP Operating System Lesson 11: Setting the date and time You can view any object’s properties by clicking the object with the secondary button, then choosing Properties from the shortcut menu that appears. The next lesson explains how to set two other properties—the date and time.
Page 155 Getting to Know the Windows ® XP Operating System Lesson 11: Setting the date and time Sample Date and Time Properties dialog box HINT: To open the Date and Time Properties dialog box more quickly, either click the time display on the taskbar with the secondary button, then click Adjust Date and Time, or double- click the time display.
Page 156: Lesson 12: Removing Objects From The Desktop
Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop Lesson 12: Removing objects from the desktop Earlier in this tutorial, you created a new icon on the desktop. Since everything you have done to this point has been just practice, you may want to return the desktop back to its original uncluttered state.
Page 157 Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop Sample Recycle Bin open on the desktop To completely remove an object, select it, and then click File, Delete. The object is permanently deleted from the Recycle Bin. Later on—in your real work, not in this tutorial—you will use the Recycle Bin to delete other objects such as folders, documents, and sometimes even programs.
Page 158: Lesson 13: Using System Restore
Getting to Know the Windows ® XP Operating System Lesson 13: Using System Restore To delete everything from the Recycle Bin at once, choose Empty Recycle Bin from the File menu. Click Yes to confirm that you are sure. HINT: Empty the Recycle Bin periodically. Even though an item is moved to the Recycle Bin, it still uses valuable space on the hard disk drive until it is deleted from the Recycle Bin.
Page 159: Lesson 14: If I Am Lost, What Do I Do
Getting to Know the Windows ® XP Operating System The operating system guides you through the process of storing your system settings for future use. It also guides you through restoring your system to the selected date or time. Lesson 14: If I am lost, what do I do? This lesson teaches you how to use some of the Help and Support features in Windows ®...
Page 160 Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? The Help and Support Center Index window pane appears. Sample Help and Support Center Index The left side of the screen contains the index. The text box above the index, where the cursor is flashing, lets you type in a topic you want to find in the index.
Page 161: Using The Online Tours And Tutorials
Getting to Know the Windows ® XP Operating System Sample Drawing help window Click the Paint link. The operating system opens the Paint program. Not every Help topic contains a hot link to start the program it is talking about. However, when you do encounter one, it provides a convenient way to start the program to look at it while you read about the program in the Help topic.
Page 162: Lesson 15: Turning Off Your Computer
Getting to Know the Windows ® XP Operating System Lesson 15: Turning off your computer Click What’s new for Help and support. On the right pane, click Tours and articles. On the right pane, click Tour of Windows XP. Sample Help and Support Center window Lesson 15: Turning off your computer It is very important that you let the Windows system shut down your computer.
Page 163: Chapter 5: Exploring Your Options
Chapter 5 Exploring Your Options In this chapter, you will explore other features of your notebook computer. ® Windows XP special features The Windows features and enhancements, including: ❖ New system file protection ❖ A system restore function, allowing you to rollback the system to its previous mode ❖...
Page 164: Personalizing Your Desktop
Exploring Your Options Personalizing your desktop Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work. You can customize the following aspects of the desktop: ❖ Taskbar—which resources to display for quick access ❖...
Page 165: Bringing The World To Your Desktop
Bringing the world to your desktop With the Windows desktop with complete World Wide Web integration at a single click. Turning on the Web content interface The first step to bring active content to your desktop is to turn on the Web content interface: Point to an empty space on the desktop and click the secondary button.
Page 166: Changing Desktop And Browsing Style
Exploring Your Options Personalizing your desktop To browse the Gallery for more components to add, click Visit Gallery. In order to browse, an active Internet connection must be established. To select some other Web site, type the address of the Web site you want or click Browse to locate it.
Page 167: Personalizing Individual Windows
Choosing a style To select desktop and browsing style options: Click Start, then click My Computer. The My Computer window appears. Select the Tools menu, then click Folder Options. The Folder Options dialog box appears. Sample Folder Options dialog box Click the preferred options.
Page 168: Customizing Window Toolbars
Exploring Your Options Personalizing your desktop a regular basis. For example, using this Web integration feature you can monitor weather, game scores, stock prices, or headlines—all in the window of your choice. Customizing window toolbars You can display one or more customizable toolbars at the top of a window.
Page 169: Displaying Information About Each Folder
The elements you can add to the top of the window are: Toolbar element Address Bar Standard buttons Displays buttons for commonly used Displaying a toolbar in a window Click Start, then click My Computer. The My Computer window appears. On the View menu, point to Toolbars, then click the name of the toolbar you want to display.
Page 170: Using Your Computer At The Office
Exploring Your Options Using your computer at the office Open the folder you want to view as a Web page. In the Tools menu, select Folder Options. In the Tasks section, click the button for Show common tasks in folders. Click Apply, then OK.
Page 171: Setting Up For Communications
You can connect an external USB-compatible keyboard and a USB-compatible mouse to one of the USB ports. For more information about connecting a mouse, see mouse” on page Setting up for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: ❖...
Page 172: Connecting The Modem To A Telephone Line
To verify that the modem is set up properly, double-click the COM port to which your modem is connected. The TOSHIBA Software Modem Properties box appears. In the device status area, the computer should indicate whether the modem is working properly.
Page 173: Exchanging Data With Another Computer
❖ Set up a home or small office network ❖ Set up an advanced connection Click Next and follow the directions on the screen. The computer connects to the network. Exchanging data with another computer To transfer a large amount of information between computers, you need a physical connection and a synchronization program.
Page 174: Setting Up A Wireless Connection
Accessing the wireless modules using your system tray The following information applies to systems with the optional Wi-Fi feature: To install the Wi-Fi option at a later time, contact your Toshiba Authorized Service Provider. When using your Wi-Fi Mini PCI module, your computer may display a Network Connection icon in the desktop’s...
Page 175: Connecting To The Internet
Connecting to the Internet To connect to the Internet you may need: ❖ A modem (one comes with your computer) ❖ A telephone line, DSL, a cable connection, or a satellite link ❖ A browser or communications program ❖ An Internet Service Provider (ISP) Once you have established an ISP account, you can access the Internet.
Page 176: An Overview Of Using The Internet
Exploring Your Options An overview of using the Internet An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: ❖ The Internet ❖ The World Wide Web ❖...
Page 177: Internet Service Providers
Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection. You can connect to the Internet by using a telephone and modem or through other higher-speed communication methods such as Digital Subscriber Lines (DSL), cable, and...
Page 178: Internet Features
Exploring Your Options An overview of using the Internet Internet features The Internet offers many types of communication tools to help you perform many tasks. ❖ Internet email To send and receive email of your own, you need a mailbox on the Web, or an email address. If you have an account with an ISP, you can probably set up an email address at the same time as you sign up for the service.
Page 179: Toshiba's Online Resources
You can also use the File Transfer Protocol (FTP) supported by a separate software program. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 180: Playing Dvds
Exploring Your Options Exploring video features Sample Display Properties dialog box Click the Settings tab. Slide the Screen area slider bar toward Less until the setting reads 800 x 600, then click Apply. The screen blinks momentarily while the settings are adjusted.
Page 181: Display Settings Hot Key
When the DVD-ROM or multi-function drive control panel appears on your screen, press the Play button. Display settings hot key Using the view DVD movies or presentations on an external device. For more information, see Exploring audio features You can use your computer to record sounds using an external microphone.
Page 182: Adjusting Recording Settings
Exploring Your Options Exploring audio features Positioning Sample Sound Recorder screen Click the Record button and speak normally into the microphone. You can only record 60 seconds at a time. When you have finished recording, click the Stop button. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu.
Page 183: Using External Speakers Or Headphones
In the Audio Properties dialog box, adjust the Recording Volume and Preferred device. Click OK. Your new settings take effect the next time you record. Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers.
Page 184: Pc Card Supporting Software
Exploring Your Options Using PC Cards Check the documentation that came with the PC Card to see if it conforms to the PCMCIA 2.1 standard, or later. Other cards may work with your computer, but are likely to be much more difficult to set up and use. PC Card supporting software PC Cards require Card and Socket Services software —...
Page 185: Removing Pc Cards
Inserting a PC Card To avoid damaging the PC Card or the computer, do not force the card into the PC Card slot. Removing PC Cards Stop the PC Card by clicking the Safely Remove Hardware icon on the system tray. After the Safe to Remove Hardware message appears, it is safe to remove the PC Card.
Page 186: Hot Swapping
Exploring Your Options Using SD Cards Hot swapping One of the great things about PC Cards is that you can replace one PC Card with another while the computer is on. This is called “hot swapping.” Hot swapping precautions Although you can insert a PC Card at any time, to avoid data loss never remove a card while it is in use.
Page 187: Removing An Sd Card
Inserting an SD card Removing an SD card Click the Safely Remove Hardware icon on the system tray. Click Safely remove xxxx, where xxxx is the identifier for your SD card. Press the card inward to release it. The card pops out slightly. Removing an SD card Lift the side of the computer where the card is located, grasp the card, and pull it straight out.
Page 188: Chapter 6: Toshiba Utilities
TOSHIBA Power Saver ❖ Toshiba Hardware Setup TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the Fn key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required.
Page 189 To open Accessibility: Click Start, then click All Programs. Select Toshiba, Utilities, Accessibility. The TOSHIBA Accessibility window appears. Check the Use Fn-StickyKey box. Sample TOSHIBA Accessibility window Put a check mark next to the desired option.
Page 190: Fn-Esse
You can assign any key that is not associated with a hot key or a keyboard overlay. Starting Fn-esse To access Fn-esse, click Start, All Programs, Toshiba, Utilities and Fn-esse. The Fn-esse keyboard appears. Sample Fn-esse keyboard 148.
Page 191: Assigning A Key To A Program Or Document
Release the primary button. Fn-esse displays the Add/Edit Command window with the Description, Command Line, and Working Directory fields automatically completed. Click OK to close the Add/Edit Command window with your key assignment in place. Toshiba Utilities Fn-esse ® Explorer (or the...
Page 192 Toshiba Utilities Fn-esse The program or document is now associated with the key you just selected. To open the program or document, press Using the keyboard To assign a key to open a program or document: Start Fn-esse. Using the keyboard, press and hold the the desired assignment key.
Page 193: Viewing Existing Key Assignments
To remove the key assignment, click Clear. Hotkey utility The hotkey utility allows you to receive a confirmation message when you use the hot key combination for Standby ] and Hibernation [ Fn + F3 plus the appropriate key. Fn + F4 Toshiba Utilities Hotkey utility...
Page 194: Toshiba Console
TOSHIBA Console The TOSHIBA Console provides quick access to computer functions and allows you to customize a range of computer settings. To access the TOSHIBA Console, do one of the following: ❖ Double-click the TOSHIBA Console icon on the desktop.
Page 195: Customize Your Computer
Point to TOSHIBA, then Utilities, then click the resulting Console selection. The TOSHIBA Console window appears. Sample TOSHIBA Console window The TOSHIBA Console offers the following features: ❖ Customize Your Computer ❖ Security Customize Your Computer The features available in this category are: ❖...
Page 196: Security
The Power Management feature enables you to control your computer’s power usage, regardless of the source, and use the many preset power modes, or create one yourself. To access Power Management through the TOSHIBA Console, double-click the Power Management icon. The TOSHIBA Power Saver Properties window appears.
Page 197 You can either use one of the preset modes or create and use your own customized profile. The preset profiles cannot be deleted. By changing the options that appear in the TOSHIBA Power Saver Properties window and clicking OK, you can reconfigure that function. Any options that you change become effective when you click either OK or Apply.
Page 198: Toshiba Hardware Setup
You may also change settings on the Setup Action tab. Keep in mind however, that by default, these actions will apply to all profiles. Toshiba Hardware Setup Toshiba Hardware Setup is the Toshiba configuration management tool. To access it: In the TOSHIBA Console, click the Toshiba Hardware icon.
Page 199 Sample TOSHIBA HWSetup window The TOSHIBA HWSetup window appears with tabs for the following: ❖ Display — Allows you to select the built-in LCD and/or external monitor when the computer powers on. ❖ Boot Priority — Allows you to change the sequence in which your computer searches the drives for the operating system.
Page 200 Toshiba Utilities TOSHIBA Console ❖ Keyboard — Allows you to enable or disable the “wake- up on keyboard” feature. The feature allows you to “wake” the machine from Standby by pressing a key. ❖ USB — Allows you to enable or disable USB Legacy Emulation.
Page 201: Chapter 7: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 202 If Something Goes Wrong Problems that are easy to fix To close a program that has stopped responding: Press Ctrl The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 203: Problems When You Turn On The Computer
Press Enter describing what you were doing when you received the message. Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start.
Page 204: The Windows ® Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working diskette drive, press the left or right arrow key and choose your boot-up device. HINT: Press F12 as you power on the computer to access the menu. The computer displays the message.
Page 205: The Windows ® Operating System Is Not Working
The Windows® operating system is not working ❖ The operating system responds differently from the normal routine. ❖ The screen does not look right. Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device.
Page 206: Internet Problems
If Something Goes Wrong The Windows® operating system is not working ❖ Reboot ❖ Return to OS Choices Menu See your Windows TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode.
Page 207: Resolving A Hardware Conflict
To access Windows Click Start, then click Help and Support. The Help and Support Center window appears. Then do one or both of the following: ❖ In the search field, type in the topic of the problem with which you need help and follow the on-screen instructions.
Page 208: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict The recommended procedure for getting multiple devices to work together is to add and set up one device at a time. After you add each device, test it to make sure it and all previously connected devices work.
Page 209 Plug and Play With Plug and Play and the Windows avoiding hardware conflicts is easy. Plug and Play is a computer standard that helps the system BIOS (basic input/ output system) and the operating system to automatically assign resources to Plug and Play-compliant devices. In theory, if every device connected to the computer is Plug and Play-compliant, no two devices will compete for the same system resources.
Page 210: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
Page 211 To check a device’s properties: Click Start, Control Panel, Performance and Maintenance, Administrative Tools. Double-click the Computer Management icon. In the left pane, click Device Manager. To view the device(s) installed, double-click the device type. To view the properties, double-click the device. The operating system displays the Device Properties window, which provides an array of tabs.
Page 212: Memory Module Problems
If Something Goes Wrong Resolving a hardware conflict Memory module problems Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its gold connector bar (on the side you insert into the computer).
Page 213: Power And The Batteries
Power and the batteries Your computer receives its power through the AC adapter and power cable or from the system batteries (main battery and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adapter or power cable will neither power the computer nor recharge the batteries.
Page 214: Keyboard Problems
If Something Goes Wrong Resolving a hardware conflict The battery appears not to power the computer for as long as it usually does. If you frequently recharge a partially charged battery, it may not charge fully. Let the battery discharge completely, then try charging it again.
Page 215: Display Problems
Display problems Here are some typical display problems and their solutions: The display is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing password, press the .
Page 216 If Something Goes Wrong Resolving a hardware conflict ❖ Try adjusting the contrast and brightness controls on the external monitor. ❖ Make sure the display choice is not set for the built-in screen only. The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties.
Page 217: Disk Drive Problems
Adjust the screen resolution and/or color quality. Click OK. The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Small bright dots appear on your TFT display when you turn on your computer.
Page 218 If Something Goes Wrong Resolving a hardware conflict Right-click the drive you want to check and click Properties. The drive’s properties box appears. Click the Tools tab. Click the Check Now button. The Check Disk window appears. You can choose one or both options: ❖...
Page 219: Dvd-Rom Or Multi-Function Drive Problems
You may be inserting the diskette incorrectly. Hold the diskette with the hub side facing down, and insert it so that the metal head window cover goes into the drive first. The metal cover or a loose label may be obstructing the path into the drive.
Page 220 If Something Goes Wrong Resolving a hardware conflict You press the disc eject button, but the drive tray does not slide out. Make sure the computer is connected to a power source and turned on. The DVD-ROM or multi-function drive eject mechanism requires power to operate.
Page 221: Sound System Problems
Double-click the Secondary IDE Channel. The Secondary IDE Channel Properties window appears. Sample Secondary IDE Channel Properties window Click the Advanced Settings tab. Look at Device 0. The current transfer mode should be Ultra DMA Mode 2. If it is not, select Ultra DMA Mode 2 from the pull-down menu and click OK.
Page 222: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud. Adjust the volume control.
Page 223 Some card manufacturers use special software called enablers to support their cards. Enablers result in nonstandard configurations that can cause problems when installing the PC Card. If your system does not have built-in drivers for your PC Card and the card did not come with an operating system driver, it may not work under the operating system.
Page 224 If Something Goes Wrong Resolving a hardware conflict Double-click the appropriate category for the PC Card being used. Double-click the name of the PC Card device. The operating system displays your PC Card’s Properties window, which contains information about your PC Card configuration and status.
Page 225: Printer Problems
A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section. Printer problems This section lists some of the most common printer problems: The printer will not print.
Page 226: Modem Problems
Make sure the line has a dial tone. Connect a telephone handset to the line to check this. The other system may be busy or off line. Try making a test transmission to someone else. 171. toshiba.com...
Page 227: Develop Good Computing Habits
Develop good computing habits Make sure you are prepared. Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 228: If You Need Further Assistance
GO, and then clicking the Detailed Specs link from the menu on the left. Or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer, see contact” on page by selecting your particular product and 229.
Page 229: Contacting Toshiba
Internet browser by typing To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com Toshiba voice contact Before calling Toshiba, make sure you have: ❖...
Page 230: Other Toshiba Internet Web Sites
If Something Goes Wrong Other Toshiba Internet Web sites Other Toshiba Internet Web sites toshiba.com computers.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V.
Page 231 800-457-7777 (within the US) 949-859-4273 (outside of the US - this call may incur long distance charges) Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. Tel: 5249 6500...
Page 232 Ur. Quinta Grande 2720 Alfragide Portugal Slovakia HTC a.s. Dobrovicova 8 81109 Bratislava Slovakia Spain Toshiba Information Systems (España) S.A. Parque Empresarial San Fernando Edificio Europa, 1a Planta Escalera A 28831 (Madrid) San Fernando de Henares Spain Switzerland Ozalid AG Herostrasse 7 8048 Zürich...
Page 233: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 234: Without A Password
Hot Keys Instant password security Without a password key combination turns off the display and activates Fn + F1 instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user.
Page 235: Maintaining Security When The Battery Is Not Fully Charged
Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time. To protect your desktop, you must set up a screen saver with a password before activating the password feature.
Page 236: Power Usage Mode
Hot Keys Power usage mode Power usage mode This hot key displays the power usage pop-up win- dow and cycles through the battery save modes. The power usage modes in the operating system under battery power are: Long Life, Normal, High Power, DVD Playback and Presentation Sample power usage modes The power usage mode in the Windows...
Page 237: Standby Mode
Standby mode This hot key puts the computer into Standby mode. Sample Standby confirmation box ❖ A message box is displayed by default to confirm that the computer is going into Standby mode. This message box can be set so it does not display. ❖...
Page 238: Hibernation Mode
Hot Keys Hibernation mode Hibernation mode This hot key puts the computer into Hibernation mode. Sample Hibernation confirmation box ❖ If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it does not display.
Page 239: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes are: In order to use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. Display brightness Sample display brightness window ❖...
Page 240: Disabling Or Enabling The Touchpad
Hot Keys Disabling or enabling the TouchPad Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. To use the TouchPad, see the TouchPad” on page Sample disable and enable TouchPad windows Keyboard hot keys and off. off. off. For more information, see This hot key turns the cursor control overlay on This hot key turns the numeric overlay on and...
Page 241: Appendix B: Power Cable Connectors
Appendix B Power Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 242: Appendix C: Using Configfree
Appendix C Using ConfigFree With Your Computer ConfigFree™ is a set of utilities used for configuring networks that use both wired and wireless network devices. These utilities include the following: ❖ Connectivity Doctor — The Connectivity Doctor utility is used to help fix networking problems with your notebook computer.
Page 243: Getting Started
Quick Connect — The Quick Connect utility is used to configure a wireless LAN connection (ad hoc connection) between a personal computer and a Toshiba Wireless Projector. The Toshiba Wireless Projector utility must be installed in order to enable Quick Connect. For...
Page 244: Starting Configfree
Click the ConfigFree icon click the desired utility. ❖ Double-click the TOSHIBA Console icon on the desktop to open the TOSHIBA Console, and then click the ConfigFree icon. Configuring ConfigFree The ConfigFree Option dialog box is used to specify various...
Page 245: Configfree Utilities
❖ Right-click the ConfigFree icon on the taskbar, and then click Options. For more information on configuring ConfigFree, see the online help. ConfigFree Utilities Connectivity Doctor The Connectivity Doctor displays the connection configuration and the status of all wired and wireless LAN devices that are connected to the network.
Page 246: Device Settings
Using ConfigFree ConfigFree Utilities The Connectivity Doctor The Connectivity Doctor screen automatically refreshes. However, you can also use the Refresh button to refresh the screen. Device Settings The Device Settings screen displays a list of all wired, wireless, and infrared (for systems with infrared) devices that are connected to the network.
Page 247 Using ConfigFree Viewing the device settings ❖ Network Connections — Displays the Network Connection window, which contains detailed information about the network connection. ❖ Enable/Disable — You can easily enable or disable any of the listed devices simply by selecting the desired device, and then clicking the Enable/Disable button.
Page 248: Profile Settings
Using ConfigFree ConfigFree Utilities Profile Settings The Profile Settings utility displays a list of all the registered profiles in ConfigFree. You can also add, modify, and delete profiles; switch the profile being used; and view specific details about each profile. Viewing registered profiles ❖...
Page 249: Quick Connect
Toshiba Wireless Projector. As a result, you will not be able to use the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection will be broken and later re-established.
Page 250: Using Auto Switch
❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this will disconnect the wireless LAN connection). ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device.
Page 251: Auto Switch (Cable Disconnect)
You can access the Auto Switch feature in any of the following ways: ❖ From the taskbar, right-click the ConfigFree icon, and then click Auto Switch. ❖ From the Profile Settings screen, you can click the Auto Switch button. Auto Switch (Cable Disconnect) If a wired network cable is disconnected from the network, the Auto Switch (Cable Disconnect) option will automatically switch to another network device.
Page 252: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 253 direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission gigabyte hard disk drive...
Page 254 Glossary SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 255 application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 256 Glossary bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus.
Page 257 color palette — A set of specified colors that establishes the colors that can be displayed on the screen at a particular time. compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another.
Page 258 Glossary direct memory access (DMA) — A dedicated channel, bypassing the CPU, that enables direct data transfer between memory and a device. directory — See folder. disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs.
Page 259 driver — See device driver. DVD — An individual digital versatile (or video) disc. See also DVD-ROM. DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs.
Page 260 — The physical components of a computer system. Compare software. Hibernate — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 261 hot key — (1) A feature in which certain keys in combination with key can set system options or control system parameters, such as the battery save mode. (2) A key or combination of keys that activates a memory resident program. hot swapping —...
Page 262 Glossary liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it.
Page 263 MS-DOS prompt — See system prompt. multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation. multi-function drive -- A DVD drive that can read and write to CD and DVD media.
Page 264 Glossary password — A unique string of characters entered by a user to verify his or her identity to the computer or the network. PC Card — A credit-card-sized expansion card designed to increase the capabilities of notebook computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter.
Page 265 read-only memory — See ROM. reboot — See boot, restart. removable disk — A disk that can be removed from a disk drive. A diskette is one example of a removable disk. resolution — A measure of the sharpness of the images that can be produced by a printer or displayed on a screen.
Page 266 Glossary software — See program. Compare hardware. Standby — A feature of some Windows allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. Suspend —...
Page 267 Web — See World Wide Web. Wi-Fi — A trademarked term by the Wireless Capability Ethernet Alliance which stands for Wireless Fidelity. Wi-Fi is another term for the IEEE 802.11 communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) —...
Page 268: Index
Index AC adapter 49, 53 AC power light Accessories programs alarms low battery audio features avoiding injury battery alarms caring for changing charge not lasting 51, 79, 120 charging disposal installing 53, 121 light monitoring power power usage mode removing RTC (real-time clock) buttons CD controls...
Page 269 inserting problem solving channels Character Map charging 51, 120 main battery checking device properties cleaning CD or DVDs computer closing programs comfort chair lighting work habits command Shut down Turn Off commands Hibernate powering down Standby communications programs setting up system resources via modem compact discs...
Page 270 Device Manager checking properties disabling a device devices keyboard dial-up connection Dial-Up Networking Wizard Digital Subscriber Lines (DSL) disable/enable TOSHIBA Touch and Launch disabling/enabling TouchPad Disk Defragmenter disk drive corrupted/damaged data files missing files/trouble accessing a disk running slow diskette drive...
Page 271 ergonomics lighting posture seating guidelines work habits error messages device driver conflict general hardware problem non-system disk or disk error 204, 219 problem with display settings/ current settings not working with hardware program has performed an illegal operation warning resume failure Error-checking external diskette drive...
Page 272 Index icon desktop moving to desktop naming safety inserting CDs and DVDs PC Cards SD card installing main battery interference statement Internal mode Internet bookmarked site not found chat rooms connecting to news groups overview slow connection URL address not found Internet Service Provider (ISP) IRQ (Interrupt Request) keyboard...
Page 273 multi-function drive cannot access disc drive tray will not open problems start troubleshooting 136, 137 My Computer network connecting to dial-up connection New Folder icon new text document Notepad object properties online tours Paint password instant power-on PC Card Card and Socket Services checklist CIS (Card Information Structure) computer stops working...
Page 274 Index computer hangs when PC Card inserted computer will not power up contacting Toshiba corrupted/damaged data files Device Manager disabling a device disk drive is slow display is blank external display not working external keyboard not working external monitor faulty memory...
Page 275 SelectServ setting battery alarms setting up AC adapter communications 40, 46, 66 computer date and time printer TOSHIBA Touch and Launch settings TOSHIBA Touch and Launch shortcut Shut down shut down Shut down command sound speakers Stand by command Stand by mode...
Page 276 Index text file toolbars displaying in a window Toshiba Internet Web sites Toshiba Accessories information TOSHIBA Console Toshiba Hardware Setup TOSHIBA Touch and Launch disable/enable TouchPad disabling/enabling using using with control buttons transferring files transferring information between computers traveling tips...
Page 277 creating shortcuts desktop 159, 206 Help Help and Support problem solving Recycle Bin removing objects resizing or moving windows special features starting programs System Restore tours and tutorials Turn Off Web Tutorial wireless features Wi-Fi Wizards Add Printer World Wide Web 145, Index...

Toshiba Satellite A45 Series User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Getting to Know the Windows

Chapter 5: Exploring Your Options

Chapter 6: Toshiba Utilities

Chapter 7: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cable Connectors

Appendix C: Using Configfree

Quick Links

Related Manuals for Toshiba Satellite A45 Series

Summary of Contents for Toshiba Satellite A45 Series