How To Apply Lubricant; Emergency Stop; Safety Tether Key; Console - Pyle SereneLife SLFTRD18 User Manual

Track base smart digital treadmill
Table of Contents

Advertisement

How to apply lubricant

Lift one side of running belt. Pour some lubricant under the centre of the running belt on the top surface of
the running deck. Run on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.
NOTE: DO NOT over lubricate running deck. Any excess lubricant that comes out should be wiped o .
Lubricant
1 PC

EMERGENCY STOP

SAFETY TETHER KEY

Before beginning a workout session ensure that the Safety Tether Key is properly placed onto the Computer
Console and the Safety Clip is securely attached to an article of your clothing. If you fall the clip will pull out
the SAFETY TETHER KEY from the Computer Console and the running belt will stop immediately for
emergency stop, helping to prevent injury.
Replaced the Safety Tether Key onto the Computer Console. Press the START button to begin exercise again.
www.PyleUSA.com
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents