Hide thumbs Also See for D-50L:

Advertisement

DEHUMIDIER « D-50L »
Ref 94405
User's Manual - GB

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D-50L and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Romus D-50L

  • Page 1 DEHUMIDIER « D-50L » Ref 94405 User’s Manual - GB...
  • Page 2 One. Important Safety Instruction  Please read instruction carefully before use the machine. Please make sure the power supply is 220-240V/50Hz before operation.  Please do not pull out the plug by pulling power wires.  Please be careful while you moving the machine, avoid power wires to be mangled by movement.
  • Page 3 Three. Operation Instruction 1 Keys and Icon instruction LOW FAN SPEED DEFROST ICON HIGH FAN SPEED DEHUMIDIFY ICON WATER FULL ICON ACCUMULATIVE WORK TIME TEMPERATURE DISPLAY ICON DISPLAY TIME DISPLAY TIMER ON HUMIDITY ICON DISPLAY TIMER OFF ON/OFF KEY ICON HUMIDITY DOWN KEY ACCUMULATIVE...
  • Page 4 5) "-" key means humidity down, press "-" key each time, the set humidity decrease for 1%. Press"- "key continuously, the set humidity decrease by 5% per second. When you set the humidity, the humidity display on LCD light flash, it will show the current humidity if without operation in 5 seconds, the humidity display on LCD light on.
  • Page 5 Five. Maintenance and safety Do not use any relay, prolonged wire or Do not put the unit nearby stove or heater. adapter. Otherwise the resin might be melted down, even result in fire Otherwise, it might result in fire, radiation, or get an electric shock.
  • Page 6 Put the unit stably.If the unit turns over, the water Do not repair the unit privately, nor disconnect will flow out from the tank and damage something nearby. Moreover, it might result in fire or get an electric shock because of Otherwise it might result in fire or creepage.
  • Page 7 Six. Trouble shooting Malfunctions Analysis Solution 1.Power cut 1.Power on 2.Switch off 2.Switch on Does not dehumidify 3.E4 on display panel 3.Emptying water tank Dehumidify in low efficiency 1.Filter choked by dirt 1.Clean the filter 2.Somebarrier in air 2.Remove the barrier inter or outlet 3.Close the door and windows 3.
  • Page 8 Lack of refrigerant Sensor of temperature is broken Sensor of humidity is broken Water tank is full Detector of coiling pipe is broken Eight. Technology Specifiction Model D-50L Power 220-240V / 50Hz Nominal dehumidifying 50L/D capacity Nominal Rated power current 4.2A...

Table of Contents