Duplicating A Video Tape - Toshiba MV13N3C Owner's Manual

DUPLICATING A VIDEO TAPE

If you connect the TV/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make
all connections before turning on the power.
1
Insert a blank cassette with the erase preven-
tion tab intact into the TV/VCR.
Insert a previously recorded cassette into the
playback VCR or Camcorder.
CONNECTION TO ANOTHER VCR
Playback VCR
To VIDEO To AUDIO
OUT OUT
Audio/Video Cord (not supplied)
3
Press both the REC buttons
at the same time on the
remote control of the TV/VCR,
then press the PAUSE/STILL
button.
REC PAUSE/STILL
•
NOTES: It is recommended that the tape speed be set to the SP mode on the TV/VCR for best result.
•
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials
may infringe the rights of copyright owners and be contrary to copyright laws.
2
CONNECTION TO CAMCORDER
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer's instructions. A typical
Recording TV/VCR
camcorder dubbing hookup is shown below.
To Video In
To Audio In
Press the PLAY Button on the
4
playback VCR, then press the
PAUSE/STILL button.
PLAY
Press the INPUT SELECT button to select
AUDIO/VIDEO input position. "LINE" will
appear on the screen.
INPUT SELECT
Playback Camcorder
To AV Jack
Audio/Video Cord (not supplied)
5
PAUSE/
STILL PAUSE/STILL
LINE
Recording TV/VCR
To Video/Audio In
Release the recording
pause and the playback
simultaneously to begin the
duplicating process.
PAUSE/
STILL
43