Acom 04AT Operating Manual page 19

When mounting in the open, never install the tuner in a
slanted position neither with protection hood down, to avoid
contaminating the inside of the assembly, and to prevent
precipitation from seeping into it. This may cause damage
that is not covered by the warranty!
For remote / outdoor tuner operation, the grounding termi-
nal of the tuner marked GROUND, and the antenna feed-
ers should be connected as described in S. 1.5.2.
After completing the tuner installation, attaching, and con-
necting the cables, check the reliability of all fixtures and
fasten again, if necessary. Apply mineral jelly or another
suitable lubricant to the connectors, grounding terminal,
and assembling nuts and screws to prevent jamming/
clinching or damage to the threads in a future disassembly.
Nr.
1
Mast Bracket
2 Desk Bracket
3 Cable clamps
4
Desk Bracket Bolt
5 Desk Bracket Bolt Threaded Pad
6 Hose Clamp - small
7
Desk Bracket Spacer Plate
8 Wall Bracket
9
Hose Clamp - large
10 Washer (DIN6798-A4.3-A2) - mounting pos. 1, 8 and 3 (together with 13)
11 Bolt (DIN7985-M4x10-A2) - mounting pos. 1, 8 and 3 (together with 13)
12
Flat-Head Bolt (DIN965-M4x12-A2)
13 Washer (DIN9021-M4-A2) - mounting pos. 3 (together with 10 and 11)
18 18
CAUTION
WARNING HIGH VOLTAGE
CAUTION
LIST OF ACCESSORIES
ITEM PCS
1
1
5
1
1
3
1
1
3
10
10
4
5