Acom 04AT Operating Manual page 11

Never operate the tuner with its cover removed! Touching
the components inside the tuner while transmitting may re-
sult in RF burns and injury.
Mount/place the tuner so that the antenna terminals are not
accessible during operation.
Do not mount the tuner in a position that will put it under
water at any time.
Do not mount the tuner in a place that will allow sprinklers
or water hoses to spray the weather seals or connectors.
Do not try to additional weather sealing to the tuner. It
should be installed in an airy location in order to cool down
during operation and to dry up after rain or morning dew!
Fig. 2-1. ACOM 04AT tuner, with the ACOM 04-WP
weather protection cover removed, and without installation
Your new ACOM 04AT will be shipped with the protective cover mounted. Regardless
of which mounting option will be chosen (desk, wall or mast), in order to mount the
selected bracket, the weather protection cover must be removed (Fig. 2-1).
10 10
WARNING
CAUTION
accessories