Table of Contents
Advertisement
Mode
4
NORMAL
NORMAL
4
ZOOM
4
FULL
4
JUST
4
For an elongated image
AUTO
4
For a 4:3 image
Notes:
(1) Do not allow 4:3 mode to be displayed for an extended period, as this can cause a permanent ghost image to remain
on the Plasma Display Panel.
(2) The S-VIDEO terminal on this set can detect specially encoded signals that are compatible with a wide screen monitor.
When a full image from the S-VIDEO terminal of specially encoded video is detected by the set, the screen size is
automatically set to FULL mode.
Picture
3
16
ZOOM
3
9
16
FULL
3
9
16
JUST
3
9
16
AUTO
3
9
Image is expanded
Changes in accordance
3
with the AUTO mode
setting (see page 31)
ASPECT Controls
Explanation
NORMAL mode will display a 4:3 picture at its standard
4:3 size.
ZOOM mode magnifies the central section of the picture.
FULL mode will display the picture at its maximum size
but with sight elongation.
JUST mode (TheaterWide
its maximum size but with aspect correction applied to
the center of the screen so that elongation is only
apparent at the left and right edges of the screen. The
size of the picture will depend on the original signal.
Auto mode will automatically enlarge the display
(depending on the picture source), allowing you to view
the picture at its maximum size.
Note:
AUTO mode is designed to automatically adjust the aspect
ratio to handle a mix of 16:9 and 4:3 program material.
Certain 4:3 program material, such as stock market data
screens, may occasionally cause the image size to change
unexpectedly. When viewing such programs, it is
recommended that the ASPECT be set to NORMAL.
®
) will display a 4:3 picture at
23
Advertisement
Table of Contents
