Cutting Hair - Wahl MINI PRO Manual

CUTTING HAIR

For Medium to Long Cuts
The first time you cut the hair, cut only a small amount
until you become accustomed to how long each guide
comb leaves the hair. Always start by placing the
largest guide comb on the clipper, then use shorter
combs if a shorter length is desired.
Remember between professional haircuts, the hair
grows evenly all over the head and a light trimming at
the lower neck and sides may be all that is needed to
bring back that neat, well groomed look.
1. Start by combing the hair so it falls into its natural
direction.
2. Place the largest comb onto your product and start
by trimming the sides from the bottom upwards.
Hold the product lightly against the hair, with the
teeth of the guide comb pointing up but flat against
the head. Slowly lift the trimmer up and outward
through the hair, cutting only a small amount at a
4
Where the world goes to look good.
W a h l s a l o n
time.
Repeat around sides and back of head.
If you desire shorter hair, either change to a shorter
guide comb, or apply more pressure and less lift away
from head with the present attachment.
The entire procedure requires practice, and it is always
better to leave to much hair the first few haircuts.
For the top of the head, you will give a fairly short cut
if you use the No.1 guide comb. With the teeth flat
against the head, slowly start trimming from the front to
the back. Again, it is better to leave the hair longer the
first few haircuts.
For Longer Hair on Top:
By not using a guide comb, a longer cut can be
achieved. Use either a barber comb or a regular comb
and lift the hair on top of the head, cutting over the
comb, or grasp the hair between the fingers and cut to
desired length.
i n n o v a t i o n s