Personal Protective Equipment (Ppe); Specifications Of Tools To Be Used - formlabs Form Wash Installation And Usage Instructions

Some solvents, such as isopropyl alcohol (IPA) are flammable and should be stored away from
sources of ignition. Handle solvents with gloves in a well-ventilated area. Keep storage container
lid(s) closed whenever possible. More information is available at support.formlabs.com. Always
refer to the supplier's SDS.
Use the included siphon pump to avoid overfilling or spilling solvent. Operate the Form Wash
on a clear and level surface. Always remove the wash bucket or empty alcohol from the wash
bucket before storing or transporting the Form Wash.
3.2

Personal Protective Equipment (PPE)

Resin and solvents may cause skin irritation or an allergic skin reaction. Wear gloves
when handling liquid resin, liquid solvent, or resin-coated surfaces. Wash skin with
WARNING
plenty of soap and water.
Some methods of support removal may cause small pieces of supports to break away.
Beware of flying debris. Wear eye protection and gloves to protect the skin and eyes.
CAUTION
3.3

Specifications of Tools to be Used

The Form Wash shall only be used with supplied accessories and additional tools recommended
by Formlabs. Third-party accessories and materials may cause damage.
Purchase additional supplies:
• Paper towels. Keep paper towels in stock to ensure a clean work environment for printing
and finishing.
• Solvent. Multiple solvents are suitable for washing SLA printed parts. Choose the solvent
that best meets your needs and fits your workflow. For more information about solvents
and a complete list of compatible solvents, visit
• Personal Protective Equipment. Powder-free, chemical-resistant, disposable gloves (nitrile
or neoprene)
support.formlabs.com.
Safety Warnings | 15