Closed Caption Reception Adjustment; Adjusting The Audio; Muting The Sound; Selecting Stereo/Sap Broadcasts - Toshiba 26HL86 Owner's Manual

Note: A closed caption signal may not display in the following
situations:
• When a videotape has been dubbed
• When the signal reception is weak
• When the signal reception is non-standard

Closed Caption Reception Adjustment

If reception is weak, the picture may appear blurred, and
captions or text may not appear clearly on the screen. In this
case, use this function to make them appear clearer.
1
Press Y and open the Function menu.
2
Press B or b to highlight CC Reception Adjustment.
3
Press C or c to select mode 1 or 2.
Function
CC
CC Reception Adjustment
Favorite Channel
Auto Aspect
Blue Screen
Side Panel
MENU Back EXIT
Note:
• This function may not be available in some cases.
• The function is available when the TV is in ANT mode only.
The Closed Caption Reception Adjustment function may
display the captions more clearly.

Adjusting the audio

Muting the sound

Press W to partially reduce (1/2 MUTE) or turn off (MUTE)
the sound. Each time you press W, the mute mode will change
in the following order:
1/2 Mute Mute
If the closed caption mode is set to Off when you select
"MUTE" mode, the closed caption feature is automatically
activated. To mute the audio without automatically activating
the closed caption feature, use Z to set the volume to 0. See
"Using the closed caption mode" on page 37 for more
information on closed caption modes.
38
Chapter 6: Using the TV's features
1/2
C1
Mode 1
ENTER
On
On
1
Watch TV
Volume

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit a
second audio program (SAP) containing a second language,
music, or other audio information (when provided by
individual analog stations).
The MTS feature is not available when the TV is in VIDEO
mode. When the TV receives a stereo or SAP broadcast, the
word "STEREO" or "SAP" appears on-screen when E is
pressed.
To listen to stereo sound:
1
Press Y and open the Audio menu.
2
Press B or b to highlight MTS.
3
Press C or c to select Stereo.
MTS
Bass
Treble
Balance
WOW
StableSound
MENU EXIT
Back
Note:
• You can leave the MTS feature in Stereo mode and it
will automatically output the type of sound being
broadcast (stereo or monaural).
• If the stereo sound is noisy, select Mono to reduce the
noise.
To listen to a second audio program on an analog
station (if available):
Select SAP in step 3 above.
Note:
• A second audio program (SAP) can be heard only on those
TV stations that offer it. For example, a station might
broadcast another language as a second audio program. If
you have SAP on, you will see the current program on the
screen but hear the other language instead of the program's
normal audio.
• If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station's normal
audio will be output. However, occasionally there is no
sound at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.
Audio
Stereo
0
0
0
ENTER
On
Watch TV