Outside Temperature Display - Lexus RX300 Manual

INTERIOR EQUIPMENT
14R043
"Adjusting the time
1. Push the "CLOCK" button to enter the time setting mode.
2. Push the "H" or "M" button to adjust the time.
3. Push the "CLOCK" button again.
To set the clock by the radio, adjust the minute to "00" at step 2. and
push the "CLOCK" button by the time signal from the radio.
"Setting the alarm
1. Push the "CLOCK" button to display the alarm setting mode.
2. Input the time you want to sound an alarm by pushing "H" or "M"
button.
3. Push the button indicated by the "bell" mark. The bell indicator
appears.
An alarm sounds for about 20 seconds at the set time every day. To
stop the alarm, push the "CLOCK" button.
52
To disable the alarm activation, push the button indicated by the
"bell" mark at step 3. and turns off the bell indicator on the display.

OUTSIDE TEMPERATURE DISPLAY

14R050b
This display shows the outside temperature when the ignition
switch is on.
The displayed temperature ranges from –30_C (–22_F) up to 50_C
(122_F). If the temperature does not appear on the display or it
shows "– –", take your vehicle to your Lexus dealer.