Related Manuals for Instek Digital MatriVideo DVR-1U Series
Summary of Contents for Instek Digital MatriVideo DVR-1U Series
- Page 1 A complete system to provide high resolution, long-term digital video storage and an IP based CCTV solution on a scalable and reliable platform DVR -1U Quick Start Guide (HR-DR53xx-1U, HR-DR54xx-1U)
- Page 2 THANK YOU FOR PURCHASING A QUALITY PRODUCT FROM INSTEK DIGITAL. THIS QUICK START GUIDE WILL PROVIDE YOU WITH THE INSTRUCTIONS NEEDED TO CONFIGURE YOUR DVR (SERVER) AND VIEW THE VIDEO FROM THE COMMAND CENTER LITE APPLICATION (CLIENT SOFTWARE). INSTEK DIGITAL SEPERATES THE CLIENT SOFTWARE FROM THE SERVER INTO TWO DISTINCT ENTITIES.
-
Page 3: Box Contents
BOX CONTENTS FRONT PANEL OF THE 1U DVR 1. MatriVideo DVR x1 LCD Display USB Ports Power Switch 2. Document CD x1 3. Quick Start Guide x1 REAR PANEL OF THE 1U DVR 4. Power Adapter x1 5. Power Cable x1 6. - Page 4 STEP 1: CONNECT YOUR DVR Put the DVR cover back on and tighten all the screws. Open the top cover of the DVR by removing the screws on the top and sides of the unit. Connect one end of the BNC cable to the camera and the other to the video and audio-in ports.
- Page 5 STEP 2: POWER ON THE DVR The DVR uses an embedded Linux Operating System. Once the DVR has a Connect the power cord. keyboard and monitor connected, you will see a login prompt. The DVR’s default Power on the DVR from the rear panel. The username is root and the password is id.
- Page 6 Change the IP Address Type in the IP address, Command Port, Live Port and Playback Port of the NVR. System Configuration ->Network Settings -> IP Configuration? Select eth0 -> Enable eth0 -> Command Port: 80 Static IP Configuration -> Enter the IP address, Netmask, Gateway ->...
-
Page 7: Step 7 : Setting Up The Cameras
Type in the IP address of the DVR or an available For setting up IP cameras, please go to step e. time server. This will keep the time in sync Note: Before continuing, you must configure the between the DVR and your PC running the IP address of each camera to ensure it is in the Command Center application. -
Page 8: Contact Information
Setup tab and then click Basic Setup. Select a We graciously thank you for investing your camera from the camera panel and change the faith in Instek Digital and being a valuable recording mode to 24x7. Alternatively, select 24x7 part of our corporation. Instek Digital’s prime...