Toshiba D-R1SU Owner's Manual page 19

Dimming the display
Pressing the DIMMER button on the remote control
changes the brightness of the display (normal/
dimmed/off).
Switching the display
Every time you press the FL SELECT button, the
display changes between the channel, title number,
and time.
The display may not change, depending on the disc or
recording conditions.
Ä
SAP indicator
Illuminates when receiving a SAP broadcast.
Å
Analog output level indicator
Displays the analog output level.
L+R: Stereo and bilingual (left (main) channel and
right (sub) channel)
L: Left (main) channel
R: Right (sub) channel
Off: Mono
Level indicator may not show exact sound level. It
only shows the average level.
Ç
Multi display
Displays the current time, elapsed time, remaining
time, starting time of programmed recording, chapter
number or message, etc .
É
Channel indicator
Displays the current channel or other numbers
such as a title number, track number, bit rate or
input selection.
Ñ
Picture quality mode indicator
The current picture quality mode lights up.
The modes are: MN (Manual)/SP (Standard Play)/
LP (Long Play)/SP+LP+MN (Auto)
Ö
PROGRESSIVE indicator
Illuminates when video signals are output in the
progressive format.
Ü
DUBBING indicator
Illuminates when copying.
page 135
19