Specification - Toshiba D-R1SU Owner's Manual

Others

Specification

I Power requirement during operation
29W
I Power requirement at standby
2.6W or below (Eco mode: off)
0.7W or below (Eco mode: on)
I Power supply
120V AC, 60 Hz
I Mass
4.2kg
I External dimension
Width 430 x Height 78 x Depth 325mm
I Incoming channels
TV: 2-69CH, CATV:1-125CH
I Antenna input/output terminal
VHF/UHF: 75Ω, F Connector
I Demodulation input/output terminal
0.67Vp-p (75Ω) Unbalanced, Pin jack
I Signal system
Standard NTSC Color TV system
I Laser
Semiconductor laser, Wavelength: 650nm/780nm
I Format
DVD-VR format
DVD-Video format
I Image recording system
MPEG2
I Sound recording system
Dolby digital M1, M2, Linear PCM
I Disc for recording images
DVD-RAM disc (4.7GB for one side, 9.4GB for both
sides)
DVD-RW disc (4.7GB for one side)
DVD-R disc (4.7GB for one side)
140
I Image input
1.0Vp-p (75Ω), Synchronization negative,
Pin jack x 2 systems, 2 at rear, 1 in front
I Image output
1.0Vp-p (75Ω), Synchronization negative,
Pin jack x 2 systems, 2 at rear
I S Image input
(Y) 1.0Vp-p (75Ω), Synchronization negative,
Mini DIN4 Pin x 3 systems
(C) 0.286Vp-p (75Ω), 2 at rear, 1 in front
I S Image output
(Y) 1.0Vp-p (75Ω), Synchronization negative,
Mini DIN4 Pin x 2 systems
(C) 0.286Vp-p (75Ω), 2 at rear
I Component image output (Y, P
Y output (green), 1.0Vp-p (75Ω),
Synchronization negative, Pin jack x 1 system
P , P output (blue, red), 0.7Vp-p (75Ω),
B R
Pin jack x 1 system each
I Sound input
2.0V (rms), 50kΩ or below, pin jack
(L, R) x 3 systems
2 at rear, 1 in front
I Sound output
2.0V (rms), 200Ω or above, pin jack
(L, R) x 2 systems
2 at rear
I Sound output (bit stream/PCM optical
terminal)
Optical connector x 1 system
I Sound output (bit stream/PCM coaxial
terminal)
0.5Vp-p (75Ω), pin jack x 1 system
I DV input
4-pin x 1 in front
, P )
B R