Rear Panel - Toshiba D-R1SU Owner's Manual

Introduction
Index to parts and controls (Continued)

Rear Panel

1
1
AC IN socket page 15 in "INSTALLATION
GUIDE"
Connects the supplied power cord.
2
OUTPUT 1 jacks
"INSTALLATION GUIDE"
Outputs video and audio signals to a connected
TV or amplifier.
3
COMPONENT OUTPUT jacks
"INSTALLATION GUIDE"
Outputs video signals to a connected TV or
monitor.
Connects to a TV or monitor equipped with
component video jacks.
4
INPUT 1 jacks
Use this to connect the recorder to output jacks of
external devices such as another player or
camcorder.
5
VHF/UHF RF IN (FROM ANT.) input socket
page 14 in "INSTALLATION GUIDE"
Connects to an antenna or cable signal.
14
2
DIGITAL AUDIO OUTPUT
BITSTREAM/PCM
COAXIAL
11 10 9
page 15, 19 in
page 19 in
page 37
3
COMPONENT OUTPUT
Y P P
B R
S-VIDEO R
OUTPUT1
R L VIDEO
OUTPUT2
R L VIDEO S-VIDEO R
OPTICAL
8
6
VHF/UHF RF OUT (TO TV) output socket
page 14 in "INSTALLATION GUIDE"
Connects the supplied coaxial cable to a TV.
7
INPUT 3 jacks
Use this to connect the recorder to the output
jacks of external devices such as another player or
camcorder.
8
OUTPUT 2 jacks
"INSTALLATION GUIDE"
Outputs video and audio signals to a connected
TV or amplifier.
9
DIGITAL AUDIO OUT/OPTICAL jack
21, 22, 23 in "INSTALLATION GUIDE"
Use this to connect the recorder to an audio
receiver equipped with an optical digital audio
input jack.
When connecting the optical digital cable, remove
the cap and fit the connector into the jack firmly.
When not using the jack, keep the cap inserted to
protect it from dust intrusion.
4
VHF/UHF
L VIDEO S-VIDEO
INPUT1
INPUT3
L VIDEO S-VIDEO
7
page 37
page 15, 19, 21 in
5
RF IN
( FROM ANT. )
RF OUT
( TO TV )
6
page