Advertisement
Quick Links
Installation instructions
Device range gesis
wieland
Electrical
Connections
Wieland Electric GmbH
Brennerstraße 10 – 14
D-96052 Bamberg
Telefon
09 51•93 24-0
Telefax
09 51•93 24-1 98
mail@wieland-electric.com
www.wieland-electric.com
www.gesis.com
Information:
info@wieland-electric.com
Device range gesis
EIB V-......
Combination actuator
2-fold switch output and, 1-fold shutter output
3-phase mains connection
gesis
EIB V-0/2 +1W
Switch/dimming output, 3-phase mains connection
EIB V
gesis
EIB V-0/2SD
4-fold switch output, 3-phase mains connection
gesis
EIB V-0/4
2-fold shutter output, 3-phase mains connection
gesis
EIB V-0/2W
Combination actuator
2-fold switch output and, 1-fol d shutter output
1-phase mains connection
gesis
EIB V-0/2 + 1W 1PH
Switch/dimming output, 1-phase mains connection
gesis
1PH 83.020.0213.2
EIB V-0/2SD
4-fold switch output, 1-phase mains connection
gesis
EIB V-0/4 1PH
2-fold shutter output, 1-phase mains connection
gesis
EIB V-0/2W 1PH
Brief description
The switching devices from the gesis
actuators for installation in suspended ceilings or cellular floors.
They are connected solely using connectors from the gesis
range. Both single- and three-phase devices are available within
the range of switching devices. For the single-phase devices,
only terminals 2 (for external conductor), N and PE are occupied
in the supply plug that is integrated in the switching device.
All devices are however connected with 5 pole mains plugs
(1, 2, 3, for the external conductor as well as N and PE) in various
forms.
Operating elements
P 1 Output connector:
3 pole plug (L switched, N, PE) for switch outputs
4 pole plug (1 UP, 2 DOWN, N, PE) for shutter outputs
5 pole plug (L switched, N, PE, 1-10V) for switch /dimming
output
P 2 Locking of supply plug P6 or P7 (using the locking device
05.587.3156.1 if no distribution block has been used
P 3 Locking of the flat cable adapter P5 (using the locking
device 05.587.3156.1)
2
P 4 Flat cable 5 x 2.5 mm
for mains and 2 x 1.5 mm
P 5 Supply for flat cable adapter: 5 / 2 pole socket consisting
of one section for mains supply (L1, L2, L3, N, PE) and one
section for bus supply (+, –).
P 6 Supply: Mains / EIB combination connector (5 / 2 pole
socket L1, L2, L3, N, PE / +, –)
Note:
This instruction leaflet is valid for the devices
mentioned in the left listing, and additionally
for the following gesis EIB-V devices:
83.020.0212.0
2-fold shutter output with positioning, 1-phase mains connection
83.020.0213.0
gesis EIB V-0/2W Si 1Ph
83.020.0215.0
4-fold shutter output with positioning, 3-phase mains connection
gesis EIB V-0/2W Si
83.020.0216.0
6-fold switch output, 3-phase mains connection
gesis EIB V-0/6
83.020.0212.2
83.020.0215.2
83.020.0216.2
range are EIB switch
EIB V
CON
2
for EIB
83.020.0211.0
83.020.0211.2
83.020.0214.2
Advertisement
Related Manuals for Wieland gesis EIB V Series
Summary of Contents for Wieland gesis EIB V Series
- Page 1 Electrical Connections Operating elements P 1 Output connector: Wieland Electric GmbH Brennerstraße 10 – 14 3 pole plug (L switched, N, PE) for switch outputs D-96052 Bamberg 4 pole plug (1 UP, 2 DOWN, N, PE) for shutter outputs...
- Page 2 Release variant 1 ..I m p o r t a n t n o t e C a u t i o n For freely accessible Before assembling the flat cable adap- latch mechanisms Assembly of switching devices ter P5, ensure that the flat cable P4 is Place the screwdriver de-energized.
- Page 3 Connection options and operating elements 12 x 5,5 PROGRAM PHYSICAL ADDRESS: 7 x 5,5 7 mm Dismantling when using I m p o r t a n t n o t e round cables The appropriate standards, guidelines, regulations and conditions for setting up electrical installations should be complied with 24.