Table of Contents
Related Manuals for Analog way LivePremier Series
Summary of Contents for Analog way LivePremier Series
- Page 1 USER MANUAL USER MANUAL USER MANUAL USER MANUAL LivePremier unit USER MANUAL (V1.1) USER MANUAL References: USER MANUAL AQL-RS-ALPHA, AQL-RS1, AQL-RS2, USER MANUAL AQL-RS3, AQL-RS4, AQL-C, AQL-C+ USER MANUAL www.analogway.com...
- Page 2 USER MANUAL USER MANUAL Information contained in this document, in particular data, pictures, information, trademarks and logos are exclusive property of Analog Way and are protected by copyrights and other intellectual property rights. 2019, Analog Way, all rights reserved – 12/2019 Consequently, any representation and/or reproduction, in part or in full, is prohibited and would be considered a violation of Analog Way’s copyright and other intellectual property rights.
-
Page 3: Table Of Contents
USER MANUAL USER MANUAL Contents USER MANUAL Disclaimer ......................8 Copyrights ............................. 8 USER MANUAL Warranty ............................8 USER MANUAL Liability ............................8 Force Majeure ..........................8 USER MANUAL Terms and Definition ..................9 Hardware Specifications ................10 USER MANUAL Safety instructions ........................ - Page 4 USER MANUAL Section buttons (copy, paste and reset) ....................24 USER MANUAL Set a number value ..........................24 USER MANUAL Search bar ............................24 Alarms and notifications ........................24 USER MANUAL Back panel shortcuts..........................25 Standby / Restart ..........................25 USER MANUAL Dashboard - System settings .......................
- Page 5 USER MANUAL Set Output capacity ..........................41 USER MANUAL Screens ..............................41 USER MANUAL Aux Screens ............................42 Rename a Screen ..........................42 USER MANUAL Preconfig > Canvas ........................42 Patterns ............................... 43 USER MANUAL Grid canvas ............................44 Free canvas ............................45 USER MANUAL Advanced output settings (in Preconfig >...
- Page 6 USER MANUAL Delete an image file from the unit ...................... 59 USER MANUAL Manage Library from the Front panel ....................59 USER MANUAL 11.2 Images ............................60 Downscale to capacity ......................... 60 USER MANUAL Assign an imported image as image preset ..................60 Image Aspect ............................
- Page 7 USER MANUAL Set layer crop and aspect ........................77 USER MANUAL Set layer border ........................... 77 USER MANUAL Set layer smooth border ........................78 Set layer shadow ..........................78 USER MANUAL Set layer color filter ..........................78 Set layer Horizontal and Vertical flip ....................78 USER MANUAL 14.3 Layer transition ...........................
-
Page 8: Disclaimer
1.3 Liability Analog Way shall not be liable for any loss or damage, be it direct or indirect in regards to the utility or contents of the software or hardware, except to the extent provided by law. Notwithstanding the above, liability for indirect, special, incidental or consequential loss or damage that may arise in respect of the software or hardware, is expressly excluded. -
Page 9: Terms And Definition
WebRCS: User interface to setup and operate the LivePremier. It is a web browser based Remote Control Software designed by Analog Way. Widget: Multiviewer item displaying one content (Input, Image, Timer, Preview or Program Screen). Similar to a Layer but without visual priority, widgets are displayed on same level and cannot overlap. -
Page 10: Hardware Specifications
The internal Lithium cell battery is not replaceable. In case of problem, contact your supplier or Analog Way. • OPENINGS: Never push objects of any kind into this product through the openings. If liquids have been spilled or objects have fallen into the device, unplug it immediately and have it checked by a qualified technician. -
Page 11: French
USER MANUAL USER MANUAL French USER MANUAL Afin de mieux comprendre le fonctionnement de cet appareil nous vous conseillons de bien lire toutes les consignes de sécurité et de fonctionnement avant utilisation. Conservez les instructions de sécurité et de USER MANUAL fonctionnement afin de pouvoir les consulter ultérieurement. -
Page 12: Italian
USER MANUAL La pile bouton au Lithium présente à l’intérieur de la machine n’est pas remplaçable. En cas de problème, USER MANUAL contactez le service après-vente, votre revendeur ou adressez-vous à un personnel qualifié uniquement. USER MANUAL • OUVERTURES ET ORIFICES : Les appareils peuvent comporter des ouvertures (aération, fentes, etc.), veuillez ne jamais y introduire d’objets et ne jamais obstruer ses ouvertures. -
Page 13: German
USER MANUAL nonché svitare le viti che appaiono esteriormente, poiché ció puó provocare all’utilizzatore un rischio di shock USER MANUAL elettrico o altri rischi. Non sostituire le batterie a bottone presenti all’interno dell’unita’. USER MANUAL • APERTURE DI VENTILAZIONE: Le apparecchiature possono comportare delle aperture di ventilazione, si prega di non introdurre mai oggetti o ostruire le sue fessure. -
Page 14: Spanish
USER MANUAL oder ein Gegenstand in das Gerät gelangt, den Stecker herausziehen und es vor einer neuen Inbetriebnahme USER MANUAL von qualifiziertem Fachpersonal überprüfen lassen. USER MANUAL Spanish USER MANUAL Para comprender mejor el funcionamiento de este aparato, le recomendamos que le acuidadosamente todas las consignas de seguridad y de funcionamiento del aparato antes de usarlo. -
Page 15: Environmental Specifications For All Livepremier Models
USER MANUAL USER MANUAL Environmental specifications for all LivePremier models USER MANUAL General: • Cooling air flows from front side to rear. USER MANUAL • Max ambient operating temperature: < 40°C (< 104°F). • Operating temperature: 0 to +40°C / +32°F to +104°F USER MANUAL •... -
Page 16: Introducing Livepremier
USER MANUAL USER MANUAL 4 Introducing LivePremier™ USER MANUAL Before setting up the LivePremier for the first time, please read through all of the documentation to become familiar with its powerful features. The LivePremier can be used in multiple configurations, which results in USER MANUAL a versatile video production tool for live event staging and fixed installation applications. -
Page 17: Front Panel
USER MANUAL USER MANUAL 4.2 Front panel USER MANUAL It is composed of one OLED display, two USB ports, three buttons (Power, Enter and Exit) and a coder. The front panel can be used for admin features or information (Firmware update, Network settings, USER MANUAL Import/Export configuration, Factory Reset and Status check). -
Page 18: Input / Output Cards
*12G-SFP input and output cards can receive SFP modules either for SDI over Fiber of for SDI over IP / SMPTE. For more information, visit www.analogway.com or contact Analog Way support. Change an input / output card Warning: - Input / output cards are NOT hot swappable. The unit must be turned off and disconnected from power. -
Page 19: Fixed Parts
USER MANUAL USER MANUAL 4.5 Fixed parts USER MANUAL The following parts are fixed and available on all LivePremier units (except the second Power supply unit on 4RU units). USER MANUAL Warning: - All parts other than input and output cards are fixed and should not be removed. USER MANUAL USER MANUAL USER MANUAL... -
Page 20: Power Supply Units
4.5.5.1 Power supply compatibility Caution: - Only use power supplies provided or recommended by Analog Way. - Ensure that all power supplies present on the unit are from the same type (type 1 or type 2). - Do not use different types of power supplies in the same unit as it may damage the unit. -
Page 21: Power On And Off
USER MANUAL USER MANUAL 4.6 Power on and off USER MANUAL Start the LivePremier USER MANUAL To start the LivePremier unit safely and correctly: 1. Connect all inputs and outputs. USER MANUAL 2. Connect the power cables to the unit and then plug them into a mains socket. 3. -
Page 22: Using The Webrcs
USER MANUAL USER MANUAL 5 Using the WebRCS USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL Fig. 4 - WebRCS Interface WebRCS is the main controller for the LivePremier. It is embedded in all units and compatible with all operating systems. -
Page 23: Default Network Settings
USER MANUAL USER MANUAL Default network settings USER MANUAL Connect a computer to the LivePremier unit via LAN connection. Use a crossover cable if connecting directly to the unit, or use straight cables if connecting through a switch or hub. USER MANUAL Tip: All connections should be done before starting the LivePremier unit. -
Page 24: Mobile Version
USER MANUAL USER MANUAL Mobile version USER MANUAL Prerequisite: to access the LivePremier with a mobile device, a wi-fi router must be connected on the same network as the LivePremier unit. USER MANUAL A lighter version WebRCS is also available on iOS and Android mobile devices without any installation needed. To access the WebRCS from a mobile device, launch a web browser and enter the LivePremier IP address in USER MANUAL the address bar. -
Page 25: Back Panel Shortcuts
USER MANUAL USER MANUAL Back panel shortcuts USER MANUAL In the top bar, click to show the virtual Back panel. USER MANUAL Click the connectors to access their settings directly. USER MANUAL Standby / Restart USER MANUAL In the top bar, click then Standby or Restart and confirm. -
Page 26: Dashboard - Firmware / Hardware (Firmware Update)
USER MANUAL USER MANUAL Dashboard – Firmware / Hardware (Firmware Update) USER MANUAL Prerequisite: Go to www.analogway.com and download the latest LivePremier updater. Note: In some cases, updating the LivePremier unit may reset the Configuration (check the Release notes). USER MANUAL Tip: Export a configuration to recover it after the update (see Import and Export configuration page 18). -
Page 27: Dashboard - Network
USER MANUAL USER MANUAL Dashboard – Network USER MANUAL 1. Go to the Dashboard > Network. 2. In Adapter, set Host name. USER MANUAL 3. In IPv4, manage DHCP, set IP address, Netmask and Gateway. 4. Click Apply. USER MANUAL 5. -
Page 28: Save The Current Configuration In A Slot
USER MANUAL USER MANUAL Save the current Configuration in a Slot USER MANUAL 1. In the top bar, click , then Save / Load. USER MANUAL 2. In the Save panel, click Current Configuration. 3. In the filters, select the settings to save. USER MANUAL 4. -
Page 29: Import A Configuration
USER MANUAL USER MANUAL Import a Configuration USER MANUAL 1. In the top bar, click , then Save / Load. USER MANUAL 2. In the Load panel, click Upload file and select the configuration file to import. Or Drag and drop the configuration file from the computer file explorer to the Upload file area. USER MANUAL The configuration is extracted and conflicting settings are grayed out in the filters (version incompatibility, obsolete information, device logs). -
Page 30: Livepremier Concepts
USER MANUAL USER MANUAL 6 LivePremier concepts USER MANUAL 6.1 What is “Capacity”? USER MANUAL A capacity is the maximum bandwidth allocated to an item. Allocating a max capacity for every item ensures the interoperability between all the internal elements of a LivePremier unit. USER MANUAL USER MANUAL The range of the capacity is from... -
Page 31: Content And Layer Compatibility
USER MANUAL USER MANUAL Content and layer compatibility USER MANUAL An input or image with capacity can be used in a layer with capacity or 2: USER MANUAL USER MANUAL Layer with capacity USER MANUAL USER MANUAL USER MANUAL Content with capacity Layer with capacity The content is displayed correctly but the resources are not optimized. -
Page 32: Aux Outputs Capacity
Note: A Screen contains either mixing layers or split layers. But never a combination of both. Mixing layers This is the default layers mode for LivePremier units as well as most Analog Way products. This offers the most spectacular transition effects which made the reputation of Analog Way. -
Page 33: Livepremier Processing
USER MANUAL USER MANUAL 6.3 LivePremier Processing USER MANUAL VPUs and Scaling engines USER MANUAL The main processing components of LivePremier are the Video Processing Units (VPU). VPUs create the layers and allocate them to one or multiple outputs. Understanding VPU concept is the key for optimized USER MANUAL performance. -
Page 34: Self-Rearrangement
USER MANUAL USER MANUAL Self-rearrangement USER MANUAL A VPU has a modular architecture and rearranges its links depending on the Screen configuration: - Number of outputs in the Screen USER MANUAL - Number of layers in the Screen - Capacity of the links between layers and outputs USER MANUAL USER MANUAL VPU configuration examples... -
Page 35: A Vpu Can Support Both Capacities At The Same Time
USER MANUAL USER MANUAL A VPU can support both capacities at the same time USER MANUAL One Screen cannot support mixing and split layers at the same time. However, VPUs and Screens can support layers of capacity at the same time, in any order. USER MANUAL USER MANUAL USER MANUAL... -
Page 36: Combined Vpus
USER MANUAL USER MANUAL Combined VPUs USER MANUAL A Screen using more than 8 outputs uses another VPU. In the following example, each mixing layer of Screen 1 uses 3 layer links: USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL Screen 1 (12 outputs and 4 mixing layers) Screen 2 (4 outputs and 4 mixing layers... -
Page 37: Cut & Fill Resources
USER MANUAL USER MANUAL Cut & Fill resources USER MANUAL The Cut & Fill effect is enabled for a layer and doubles the resources needed for that layer. USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL Screen 1 (4 outputs and 2 mixing layer capacity 1; 1 mixing layer capacity with Cut &... -
Page 38: Preconfig Menu
USER MANUAL USER MANUAL 7 Preconfig Menu USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL Fig. 8 - Preconfig Menu Preconfig is composed of the following submenus: System Multiviewers quantity (one or two) Screens / Aux Screens Canvas Inputs Images... -
Page 39: Set Color Space
USER MANUAL USER MANUAL 7.1.1.2 Set relative rate USER MANUAL Caution: Make sure the reference input is a reliable source. Any disruptions in the reference signal may cause visible glitches on the output, even if the selected framelock reference input is not being displayed. USER MANUAL 1. -
Page 40: Multiviewers Quantity
USER MANUAL USER MANUAL 7.2 Multiviewers quantity USER MANUAL A Multiviewer is a dedicated output displaying a user customizable selection of Widgets as display resources. A Widget is an element containing a program, preview, input or image. One Multiviewer can display up to 24 USER MANUAL Widgets. -
Page 41: Output Capacity - The 4-4 Rule
USER MANUAL USER MANUAL Output capacity – The 4-4 rule USER MANUAL A LivePremier unit is equipped with one, two or three Video Processing cards (VPU). Output resources are impacted by format (resolution and rate). LivePremier units have a limited number of USER MANUAL Program outputs depending on the capacity set for these outputs. -
Page 42: Aux Screens
USER MANUAL USER MANUAL Aux Screens USER MANUAL An Auxiliary Screen (Aux) is a special Screen displaying one layer in full screen. The content displayed in an Aux can be an input, an image or a Program Screen. USER MANUAL Create an Aux Screen: USER MANUAL Preconfig... -
Page 43: Patterns
USER MANUAL The Screen canvas are separated in two types: USER MANUAL Grid type Recommended for standard shows (single output screen, same format displays aligned USER MANUAL horizontally or vertically, 2x2, etc.). Covering and gap are simplified in Grid with the X and Y areas. -
Page 44: Grid Canvas
USER MANUAL USER MANUAL Grid canvas USER MANUAL 7.4.2.1 Create a Grid canvas USER MANUAL Grid type, create a grid and assign outputs to corresponding cells to create the Screen canvas. USER MANUAL 1. In Preconfig > Canvas, select a Screen. 2. -
Page 45: Free Canvas
USER MANUAL USER MANUAL Free canvas USER MANUAL Free type is separated in two modes: Auto mode Set the position of each output freely. The canvas size is automatically computed and USER MANUAL optimized for the created Screen. Custom mode Set the Screen size then position each output inside the created Screen. - Page 46 USER MANUAL USER MANUAL 7.4.3.3 Create a canvas in Custom mode USER MANUAL Custom mode, enter a H and V size to create the custom Screen canvas. Then enter position or use drag and drop to position each output inside the canvas. USER MANUAL Custom mode is recommended for complex shows where the canvas size is known.
-
Page 47: Advanced Output Settings (In Preconfig > Canvas)
USER MANUAL USER MANUAL Advanced output settings (in Preconfig > Canvas) USER MANUAL Note: Output settings are applied to the selected output. These following settings are specific to outputs and can be used in all canvas types. USER MANUAL 7.4.4.1 Create an area of interest (AOI) USER MANUAL The AOI is a cropped area of the display in the output format. -
Page 48: Add Input To Output Backgrounds
USER MANUAL USER MANUAL Add input to output backgrounds USER MANUAL Note: The input and output capacities must match. An output has a pool of assigned images and inputs to be used as background content. USER MANUAL Add inputs to the output pool before they can be used as a background content for that output. Multiple inputs can be assigned to the same output background sets. -
Page 49: Preconfig > Backgrounds
USER MANUAL USER MANUAL 7.7 Preconfig > Backgrounds USER MANUAL Preconfig > Backgrounds, create background sets for each Screen. USER MANUAL Background sets USER MANUAL Each Screen is composed of one or more outputs. Assign input and images to these outputs to create background sets. -
Page 50: Multiviewers
USER MANUAL USER MANUAL 8 Multiviewers USER MANUAL A Multiviewer is an output displaying a user customizable selection of Widgets as display resources. A Widget is a Multiviewer layer containing a program, preview, input or image. One Multiviewer can display up to 24 USER MANUAL Widgets. -
Page 51: Multiviewers Pattern
USER MANUAL USER MANUAL 8.3 Multiviewers pattern USER MANUAL Multiviewers, select one Multiviewer. In Pattern / Raster, the following settings are displayed: USER MANUAL Setting name Description / Setting selection USER MANUAL Patterns Enable On/Off toggle. Display the pattern in Multiviewer USER MANUAL Patterns Select the pattern to display... -
Page 52: Outputs
USER MANUAL USER MANUAL 9 Outputs USER MANUAL Outputs, set the Label, Signal parameters, Patterns and Image correction. USER MANUAL Note: USER MANUAL - Go to Preconfig > Screens / Aux Screens > Outputs to set output resources. USER MANUAL 9.1 Outputs main screen USER MANUAL Go to... -
Page 53: Output Pattern
USER MANUAL USER MANUAL Output pattern USER MANUAL Outputs, select an output. In Pattern / Raster, the following settings are displayed: USER MANUAL Setting name Description / Setting selection USER MANUAL Patterns Enable On/Off toggle. Display the pattern in output USER MANUAL Patterns Select the pattern to display... -
Page 54: 0 Inputs
USER MANUAL USER MANUAL Inputs USER MANUAL Inputs, set the Label, Signal parameters, Patterns, Image correction, Aspect and Keying. USER MANUAL Note: USER MANUAL - Go to Preconfig > Inputs to set input resources. USER MANUAL 10.1 Inputs main screen USER MANUAL Inputs, the inputs main screen displays all inputs in a Grid view. -
Page 55: Input Signal
USER MANUAL USER MANUAL Input signal USER MANUAL Inputs, select an input. In Signal, the following settings are displayed: USER MANUAL Setting name Description / Setting selection USER MANUAL Label Rename the Input Signal Type Auto, YUV, RGB Full (0-255) or RGB Limited (16-235). USER MANUAL HDCP None*;... -
Page 56: Input Aspect
USER MANUAL USER MANUAL Input Aspect USER MANUAL Inputs, select an input. In Aspect, set the Aspect ratio or set input crop. USER MANUAL Note: Aspect ratio and Crop replaces the input content and affects every layer using it. If needed, use crop at layer level in Live or duplicate the input with a splitter. -
Page 57: Input Keying
USER MANUAL USER MANUAL Input Keying USER MANUAL Inputs, select an input. In Keying, key the content using Chroma Keying or Luma Keying. USER MANUAL - Use Chroma Keying to key a color (or hue). - Use Luma Keying to key a Luma level (or brightness). USER MANUAL 10.2.5.1 Set Chroma Keying USER MANUAL... -
Page 58: Images And Library
USER MANUAL USER MANUAL Images and Library USER MANUAL Image management is separated in two menus: USER MANUAL Library: transfer images to the LivePremier unit. USER MANUAL Images: assign uploaded image to image preset to be used in layers. USER MANUAL 11.1 Library USER MANUAL Note: LivePremier units can store up to 200 images. -
Page 59: Transfer Images From The Computer To The Unit
USER MANUAL USER MANUAL Transfer images from the computer to the unit USER MANUAL Note: It is possible to import only one folder at a time. USER MANUAL 1. In Library, select one or multiple image files (or a folder) on the computer file browser. 2. -
Page 60: Images
USER MANUAL USER MANUAL 11.2 Images USER MANUAL Images, all images presets are displayed in a Grid view. USER MANUAL The following information are displayed per image preset: USER MANUAL - Resolution - Preset capacity USER MANUAL - Preset number - Preset label USER MANUAL - The tallies turn red and green if the image preset is... -
Page 61: Image Aspect
USER MANUAL USER MANUAL Image Aspect USER MANUAL USER MANUAL Images, select an image preset. In Aspect, set the Aspect ratio or set image crop. Note: - Aspect ratio and Crop replaces the image preset content and affects every layer using it. If needed, use crop at layer level in Live. USER MANUAL - Aspect ratio and Crop set for an image preset remain when changing the image source. -
Page 62: Formats
USER MANUAL USER MANUAL Formats and EDID USER MANUAL 12.1 Formats USER MANUAL Formats, create and manage up to 16 custom formats. Custom formats are very useful for LED wall USER MANUAL applications and non-standard display applications (ex: pixel frequency over 165MHz or Dual-link outputs USER MANUAL with single link formats 2400x700@60Hz). -
Page 63: Edid
USER MANUAL USER MANUAL 12.2 EDID USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL Fig. 13 - EDID menu EDID is a metadata format used by displays to indicate their preferred format. A LivePremier unit receives EDIDs from connected inputs and outputs. -
Page 64: Export An Edid To Computer
USER MANUAL USER MANUAL Export an EDID to computer USER MANUAL 1. In EDID, hover on an EDID and click in the top right corner to show more settings. USER MANUAL 2. Click to download the EDID to the computer. USER MANUAL Import an EDID from computer USER MANUAL... -
Page 65: Audio And Extras
USER MANUAL USER MANUAL Audio and Extras USER MANUAL 13.1 Audio USER MANUAL LivePremier units are able to manage audio routing with and without Dante audio network. Using the Dante audio, LivePremier can manage up to 64 input channels and 64 output channels at 48 kHz. USER MANUAL Audio >... -
Page 66: Default Audio Routing
USER MANUAL Audio routing menu: USER MANUAL Channel receivers (Inputs and Dante IN audio channels) are located in the left panel: USER MANUAL - Click to mute the selected audio channels. USER MANUAL - Click to highlight transmitter channels using this receiver channels. Channel transmitters (Outputs and Dante OUT) audio channels are located in the right panel: USER MANUAL - Click... -
Page 67: Timers
USER MANUAL USER MANUAL 13.2 Timers USER MANUAL Timers are time-based Widgets to be displayed in Multiviewers for monitoring purposes. LivePremier units can generate up to three timers and three different modes. USER MANUAL There are three types of timers: - Current time USER MANUAL - Count down... -
Page 68: Gpio
USER MANUAL USER MANUAL 13.3 GPIO USER MANUAL LivePremier units are equipped with 2x GPI and 8x GPO. USER MANUAL Extras > GPIO, set the GPI and GPO actions. USER MANUAL USER MANUAL USER MANUAL USER MANUAL Fig. 18 - GPIO GPI settings Setting name... -
Page 69: 4 Screens
USER MANUAL USER MANUAL Screens USER MANUAL Screens is the main page for controlling a show after all pre-configurations are set: USER MANUAL - Display content in layers in Screens and Aux - Create dynamic layer transitions USER MANUAL - Transition Preview to Program USER MANUAL - Save and Load Screen memories and Master memories USER MANUAL... -
Page 70: Sources - Left Panel
USER MANUAL USER MANUAL Sources - Left panel USER MANUAL The Sources are located in the left panel. Click the icons to show the corresponding sources: Screen sources USER MANUAL USER MANUAL Background sets Inputs Image presets Program Screens Note: USER MANUAL - Program Screens can only be used as content for Aux Screens and Split layers. -
Page 71: Layout Editor
USER MANUAL USER MANUAL Layout editor USER MANUAL Click to open the layout editor, a smart tool to place layers in the Screen easily. USER MANUAL Setting name Description / Setting selection USER MANUAL Mode Mosaic places layers in custom grid. Mosaic layout automatically arranges the USER MANUAL layers in rows. -
Page 72: Bottom Bar Buttons
USER MANUAL USER MANUAL Bottom bar buttons USER MANUAL In addition to the layout editor, use the buttons in the bottom bar to help setting the layers in Screens. Button Button description USER MANUAL Action buttons USER MANUAL Box mode: the layer selection is considered as a box (ex: Middle center position puts the center of the box in the center of the Screen). -
Page 73: Transitions - Right Panel
USER MANUAL USER MANUAL Transitions - Right panel USER MANUAL Setting name Description / Setting selection USER MANUAL Select the Screens and Aux affected by transition (by default, all Screens Screen selection and all Aux are selected). USER MANUAL Copy Program to Preview after the transition. USER MANUAL If Preset Toggle is enabled for a Screen, the layers in PGM replace the layers Preset Toggle... -
Page 74: Layer Properties
USER MANUAL USER MANUAL 14.2 Layer properties USER MANUAL When a layer is selected, the following layer settings are displayed in the Properties tab: Setting name Description / Setting selection USER MANUAL Source Select a content for this layer. USER MANUAL Set layer Vertical and Horizontal position in pixels. -
Page 75: Layer Source
USER MANUAL USER MANUAL 14.2.1.2 Set layer position and size manually USER MANUAL 1. In Screens, select a layer. USER MANUAL The selected layer is highlighted. 2. Use drag and drop on the layer to move it in the Screen. USER MANUAL 3. -
Page 76: Cut & Fill Effect
USER MANUAL USER MANUAL 14.2.2.4 Set a colored background USER MANUAL In addition to the eight background sets, each Screen is able to display a color in the background layer. USER MANUAL 1. In Screens, select background layer (BKG). 2. In Properties, click Source to show the corresponding settings. USER MANUAL 3. -
Page 77: Set Layer Opacity
USER MANUAL USER MANUAL 14.2.3.2 Set Cut & Fill in layer USER MANUAL 1. In Screens, select a layer with Cut & Fill USER MANUAL 2. Assign a content in the layer. 3. In Properties, click Cut&Fill to show the corresponding settings. USER MANUAL 4. -
Page 78: Set Layer Smooth Border
USER MANUAL USER MANUAL Set layer smooth border USER MANUAL Setting a smooth border without enabling Edge creates a smooth effect around the content. USER MANUAL 1. In Screens, select a layer. 2. In Properties, click Border to show the corresponding settings. USER MANUAL 3. -
Page 79: Layer Transition
USER MANUAL USER MANUAL 14.3 Layer transition USER MANUAL The transition is the animations of the layers during Take. Each layer can be defined by an opening and a closing transition. The opening effect is triggered when the layer switches from one source to another or USER MANUAL when the layer appears on Screen. -
Page 80: 5 Memories
USER MANUAL USER MANUAL Memories USER MANUAL Memories are used to save layers settings. USER MANUAL Screen memory Saves/loads the layers settings for one Screen. Master memory Group of Screen presets. It loads multiple Screen memories at once (one per screen). USER MANUAL The LivePremier is able to save up to 1000 Screen memories and 500 Master memories. -
Page 81: Save A Master Memory From Existing Screen Memories
USER MANUAL USER MANUAL Save a Master memory from existing Screen memories USER MANUAL Because a Master memory is made from Screen memories. It is also possible to create a Master memory by pointing to existing Screen memories. USER MANUAL 1. -
Page 82: Screen Memories
USER MANUAL USER MANUAL 15.2 Screen memories USER MANUAL Save a Screen memory USER MANUAL A Screen memory saves the selected Screen in the current settings. Using Filters, select which Layers and Layer settings to save in the Screen memory. By default, all Layers and USER MANUAL all Layer settings are selected. -
Page 83: Quick Overwrite Or Revert
USER MANUAL USER MANUAL Quick overwrite or revert USER MANUAL When a Screen memory is loaded in a Screen, a button with the memory slot number appears. If changes are made to the Screen, a * appears next to the memory slot number. USER MANUAL 1. -
Page 84: 6 Multiviewers
USER MANUAL USER MANUAL Multiviewers USER MANUAL Tip: Go to Multiviewers after all pre-configurations are set. USER MANUAL A Multiviewer is an output displaying a user customizable selection of Widgets as display resources. A Widget USER MANUAL works like a layer and can display a program, preview, input, image or timer. One Multiviewer can display up to 24 Widgets. -
Page 85: Sources - Left Panel
USER MANUAL USER MANUAL Sources - Left panel USER MANUAL The Sources are located in the left panel. Click the icons to show the corresponding sources: Multiviewers sources USER MANUAL USER MANUAL Inputs Image presets Timers Screens The following information are displayed per source content: USER MANUAL - Resolution (for inputs) USER MANUAL... -
Page 86: Widget Selection
USER MANUAL USER MANUAL 16.2.1.2 Set Preview mode for Preview Screen widgets USER MANUAL 1. In Multiviewers, click Screens in the source panel. USER MANUAL 2. Hover a Preview Screen and click to show preview options: USER MANUAL Setting Description / Setting selection name USER MANUAL Select what is displayed in the Preview widget:... -
Page 87: Layout Editor
USER MANUAL USER MANUAL Layout editor USER MANUAL Click to open the layout editor, a smart tool to place widget in the Multiviewers easily. USER MANUAL Setting name Description / Setting selection USER MANUAL Rows & Create a custom grid Columns USER MANUAL Autofill... -
Page 88: Widget Properties
USER MANUAL USER MANUAL 16.3 Widget properties USER MANUAL When a widget is selected, the following widget settings are displayed in the Properties tab. Setting name Description / Setting selection USER MANUAL Enable: Toggle to show/hide the widget. USER MANUAL Widget OSD: Toggle to show/hide On Screen Display information on the widget. -
Page 89: Widget Source - Assign Content To A Widget
USER MANUAL USER MANUAL Widget source - Assign content to a widget USER MANUAL 1. In Multiviewers, click a source icon in the left panel. USER MANUAL 2. Select a widget or make sure it is available for drag and drop. 3. -
Page 90: Rename A Memory
USER MANUAL USER MANUAL Rename a Memory USER MANUAL 1. In Multiviewers, click the Memories tab in the right panel. USER MANUAL 2. Click Edit. USER MANUAL 3. Click in the top right corner of the memory slot to open the Label field. 4. -
Page 91: 7 User Maintenance And Troubleshooting
USER MANUAL USER MANUAL User Maintenance and Troubleshooting USER MANUAL 17.1 User Maintenance – Air filter USER MANUAL Tip: For optimal performance, this air filter must be cleaned by the user regularly (once a year). USER MANUAL The LivePremier unit is equipped with a removable air filter at the front of the unit. USER MANUAL Tools: Phillips screwdriver size 2, duster or vacuum. -
Page 92: Appendices
USER MANUAL The WebRCS is the main controller for LivePremier. In addition, it can be used with other control options. LivePremier units are compatible with the Analog Way Shot Box² and Control Box² and also with Companion USER MANUAL installed on a Stream deck. - Page 93 USER MANUAL USER MANUAL The Americas Europe, Middle East & Africa Asia Pacific Analog Way SAS - Headquarters Analog Way Inc. Analog Way Ltd Tel.: +33 (0)1 81 89 08 60 Tel.: +1 (678) 487 6644 Tel.: +852 2967 0428...
- Page 94 USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL www.analogway.com...
Need help?
Do you have a question about the LivePremier Series and is the answer not in the manual?
Questions and answers