Advertisement
Removing the Front Surround Assembly
To remove the Front Surround assembly remove the 2 self tapping screws, as shown in Fig 2, on both sides of the
recorder. Retain these screws for fitting of the new front surround assembly.
When the 4 screws have been removed the complete Front Surround Assembly can be gentle pulled forward to release
it from the chassis plates. The Front Surround assembly will still be attached by the cables
Carefully unplug the inverter lead, the display lead, the speaker lead and the touch screen lead. All leads should be
unplugged from the processor board and left attached to the Front Surround assembly. Do NOT unplug the lead by
pulling on the wire.
43-TV-33-88 iss.2 GLO Nov 06 UK
Fig 2
Remove 2 self tapping
screws both sides
Fig 3
3
Advertisement
