Connecting to a TV with the HDMI terminal ( Continued )
Setting the output resolution for the HDMI output that best matches your TV's capabilities
Set an output signal from the HDMI OUTPUT terminal of the recorder in accordance with your TV's input signal.
Audio setting for the HDMI connection
Set "Digital output mode" of "A/V Output - Audio Settings" to "PCM"(
• When the HDMI connection is used, "Brightness Setting" and "E.B.L" of "A/V Output - Picture" are not available.
• Depending on the equipment connected to this recorder, such as a TV or a projector, no sound may be
output. In this case, set "Digital output mode" (
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
page 49) to "PCM".
Press V.OUTPUT button on the remote control to
light up the HDMI indicator.
Press RESOLUTION button on the remote control
changes output signals as below. Select the
appropriate output signal.
*Displayed on the TV screen. Do not appear when the
HDMI OUTPUT terminal is not connected or the
HDMI connection is not verified. But HDMI indicator
Video output signal*