Lindy 32327 Quick Installation Manual page 4

Quick Installation Guide

Back Panel View
1 – Main Power Switch
2 – DC port to connect the included power supply unit
3 – RJ 45 I/O ports that have 2 main functions:
a) RS232 – (Input port only): allows you to control the unit through a RS232 connection using the RJ45 to
RS232 (DB9) cable.
b) Daisy Chain Port (Input and Output): connect up to 8 switch No.32327 in a cascade configuration to control
a maximum of 32 computers (please refer to the full manual for a complete description of this function)
4 – Console Ports to connect the local USB Keyboard & Mouse, the DVI-D Monitors (digital only:
please don't use DVI to VGA cables and adapter on these ports) and Audio Speakers
The A port is for the main monitor and the B is for the auxiliary monitor (full screen mode only).
5 – Computer ports to connect with the supplied cables (DVI-D, USB and Audio) each PC
6 – Reset button to restore the factory default setting. Insert a paper clip before switching on the Switch.
7 – LAN port to connect the unit to the optional remote unit (no.32328 – Not included). Please refer to the full
manual or to the manual for No.32328 for further information.
8 – Dip Switch set that must match the same sequence set on the optional remote unit no. 32328 (not included)
Installation
To begin to work with this switch please follow these steps:
1) Connect the local console as follow (please refer to the picture below): 1 – Local DVI-D Main Monitor, 2 –
Local DVI-D secondary monitor (Optional), 3 – Local USB Keyboard, 4- Local USB Mouse and 5 – Local
Speakers
English