Measuring Process For Windscreen Washer Fluid-Check; Measuring Process For Determining Battery Acid Density; Cleaning And Maintenance; Warranty And Service - AEG RX 3 Instructions For Use Manual

18
solution is guaranteed.
5. the measuring result will not be affected by the
temperature of the cooling solution.
6. after measuring has occurred, clean the included
pipette [10] and the refractometer thoroughly.
* in Europe, Propylene is primarily used as an anti-freeze agent.
** Outside of Europe, Ethylene is primarily used as an
anti-freeze agent.
Measuring Process for Windscreen Washer
Fluid-Check
1. the measuring process is identical to the one
used for the anti-freeze-check.
2. For the windscreen washer fluid-check [c], the
measured value can be read in °c on the measu-
ring scale and indicates a guideline value, as
the composition of individual anti-freeze agents
varies.
3. after measuring has occurred, clean the included
pipette [10] and the refractometer thoroughly.
Measuring Process for determining Battery
Acid Density
1. instead of the anti-freeze solution, apply a little
battery acid to the prism surface [2] by using the
pipette [10].
2. take readings for the acid density in g/cm
(kg/l) by using the light-dark-border on the
measuring scale for determining [a] "- / +" the
battery acid density.
3. the scale [a] is divided into three areas to deter-
mine the battery state of charge (SOc).
REcHaRgE = replace/recharge (<1.20 g/cm³);
Battery State of charge (SOc)
~50%
FaiR = acceptable
(1.20 to 1.25 g/cm³); Battery
State of charge (SOc) ~75%
gOOD = good (>1.25 g/cm³); Battery
State of charge (SOc) ~100%
[2] and prism cover [1] with an absorbent cloth.
then, thoroughly clean the prism and prism cover
with a damp cloth and wipe both parts with a soft,
dry cloth.
clEaning anD
maintEnancE
clean the refractometer with a soft, damp cloth.
Do not use any aggressive and abrasive cleaning
products. the refractometer is maintenance-free.

WaRRantY anD SERVicE

the general warranty conditions refer to production
and material defects.
if the device is faulty, please take it to your nearest
dealer or return it to the relevant shop.
to speed-up the warranty and repair work, the
following is required:
a copy of the receipt (delivery order, receipt)
▪
3
showing the date of purchase.
Reason for complaint or description of fault.
▪

DiSPOSal

the packaging is made from environmentally friend-
ly materials which can be disposed of at your local
recycle centre.
images may slightly deviate from the actual product.
Subject to change in the interest of technical ad-
vances. Decorations not included.
Caution!
after all measurements have been comple-
ted, remove liquids from the prism surface
GB
19