Subscribe to Our Youtube Channel
Related Manuals for pottery barn kids SLOAN
Summary of Contents for pottery barn kids SLOAN
- Page 1 SLOAN ACRYLIC TODDLER BED CONVERSION KIT Date: 15‐Dec‐15 www. potterybarnkids.com ...
- Page 2 WARNING ENTRAPMENT/STRANGULATION HAZARD: Infants have died in toddler beds from entrapment and strangulation. Failure to follow these warnings and assembly instructions could result in serious injury or death. NEVER use bed with children under 15 months. ...
- Page 3 PARTS INCLUDED: (O) GUARDRAIL (1x) CRIB PARTS (Sold separately): (A) CRIB END (2x) (B) CRIB STATIONARY SIDE (2x) (C) MATTRESS BASE (1x) (D) Leg Support (2x) (E) Leg (4x) HARDWARE INCLUDED: (F) Bolt M6x60mm - (2x) (G) Half Moon Washer - (2x) (H) Bolt M6x45mm - (1x) (K) Allen Key with Ball Tip - (1x) Date: 15‐Dec‐15...
- Page 4 ASSEMBLY INSTRUCTION STEPS: 1. Remove the assembly instructions from the envelope attached to crib mattress base and review. Keep them handy for referring to the part and hardware descriptions. 2. Carefully turn the crib lying down on its side. Remove (D&E) as shown below. *Note : Keep the bolts (H) for later use.
- Page 5 3. Remove Crib Stationary Side as shown below. 2x 4. To convert your Crib to a Toddler bed, the mattress base has to be installed in the lowest position (Level 1). If it is not, unscrew Mattress Base Bolts ( I ), line up the Mattress Base with the holes at the lowest position and re-attach the Mattress Base using the same bolts ( I ).
- Page 6 5. Attach Guardrail (O) to (A) as shown below. (F) Bolt- M6 x 60mm 2x (G) Half Moon Washer 2x (H) Bolt- M6 x 45mm 1x 6. Attach (D&E) to (B&O) as shown below. From Step 2 (H) Bolt M6x45mm - 8x ...
- Page 7 7. Gently turn the bed upright. Check alignments and fully tighten all connections at this time. WARNING: The plastic film acrylic used protection during transport, please remove this film completely before using. 8. Assembly is now complete. 9. Place the assembly instructions back into the envelope mounted on the mattress base for future reference.
Need help?
Do you have a question about the SLOAN and is the answer not in the manual?
Questions and answers