Connecting To Optional Equipment - Toshiba SD-K741SU Owner's Manual

Connections
Connecting to

Connecting to Optional Equipment

You can enjoy high quality dynamic sounds by connecting the DVD video player.
to optional audio equipment.
● For connection to your TV, see "Connecting to a TV".
18 19
● For details of output sound, see
● This section uses the following reference marks.
:Front speaker
:Rear speaker
:Sub woofer
:Center speaker
:signal fl ow
Notes:
● DO NOT connect the BITSTREAM/PCM AUDIO OUT
jack of the DVD video player to the AC-3 RF input of a
Dolby Digital Receiver. This input on your A/V receiver
is reserved for Laser disc use only and is incompatible
with the BITSTREAM/PCM AUDIO OUT jack of the DVD
video player.
● Connect the BITSTREAM/PCM AUDIO OUT jack of the
DVD video player to the "DIGITAL (COAXIAL)" input of a
Receiver or Processor.
● Refer to the owner's manual of the connected equipment
as well.
● When you connect the DVD video player to other
equipment, be sure to turn off the power and unplug all
of the equipment from the wall outlet before making any
connections.
● The output sound of the DVD video player has a wide
dynamic range. Be sure to adjust the receiver's volume to
a moderate listening level. Otherwise, the speakers and
your hearing may be damaged by a sudden high volume
sound.
● Turn off the amplifi er before you connect or disconnect
the DVD video player's power cord. If you leave the
amplifi er power on, the speakers may be damaged.
20
.
42
.
Notice
● When you are connecting (via the BITSTREAM/PCM
AUDIO OUT jack) an AV decoder that does not
have Dolby Digital, Digital Theater Systems (DTS)
decoding function, be sure to set "Digital Output" to
"PCM" from the on-screen displays. Otherwise, high
volume sound may damage your hearing as well as
the speakers.
● When playing DTS-encoded discs (audio CDs),
excessive noise may be output from the analog audio
output jacks. To avoid possible damage to the audio
system, you should take proper precautions when the
analog audio output jacks of the DVD video player
are connected to an amplifi cation system.To enjoy
DTS Digital Surround playback, an external 5.1
TM
channel DTS Digital Surround
be connected to the BITSTREAM/PCM AUDIO OUT
jack of the DVD video player.
decode system must
TM