Toshiba SD-K741SU Owner's Manual page 25

2, 4
1
STOP
PLAY
PAUSE
MENU
ENTER
/
TOP MENU
■
To pause playback (still mode)
Press PAUSE/STEP during playback.
To resume normal playback, press
PAUSE/STEP
the PLAY button.
● The sound is muted during still
‚•
mode.
■
To stop playback
Press STOP.
STOP
■
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
OPEN/CLOSE
opens completely.
Be sure to press the OPEN/CLOSE button to close
the disc tray after you remove the disc.
Notes
● Do not move the DVD video player during playback. Doing so may damage the disc.
● Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so
may cause the DVD video player to malfunction.
● Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD
video player to malfunction.
● In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-
screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure
to press the STOP button on your remote control once the movie is completed.
■ To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast may
appear on the TV screen while playing a DVD video disc because the high resolution
pictures on these discs include a lot of information. While the amount of noise depends
on the TV you use with this DVD video player, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
■ About
DVD
The
DVD
function described under that heading.
/
/
: You can use this function with DVD video discs.
DVD
: You can use this function with VIDEO CDs.
VCD
: You can use this function with audio CDs.
CD
VCD CD
icons on the heading bar show the playable discs for the
VCD CD
■
To turn the power off (To enter the standby
mode).
Press ON/STANDBY and the ON/STANDBY
indicator turns off.
Note
Be aware that this equipment is still powered even after
the ON/STANDBY indicator turns off (standby mode) by
pressing the ON/STANDBY button. To disconnect this
equipment completely from the main power, pull out the
power plug from the wall outlet.
■
About the screen saver
If you leave the DVD video player unattended for a
long while, the screen saver of the DVD video player
automatically appears. To turn off the screen saver,
press the PLAY button.
■
Automatic Power Off function
If the DVD video player is stopped or the screen saver
is engaged for approximately 20 minutes, the DVD
video player automatically turns itself off.
25