Advertisement
High-Voltage Power Amplifier Operation
Default Setting: Low Beam Mode
Connector
Channel
Default Connection
A
1
Low Beam Headlights
2
High Beam Headlights
B
3
Not used
4
Not used
C
5
Tail Lights
6
Brake Lights
D
7
Reverse Lights
8
Not used
High-Voltage Power Amplifier Mode Selection
Use the Mode Select button on the high-voltage power amplifier to toggle through the different lighting modes (from Low Beam Mode to High Beam
Mode to Daytime Mode).
Connector
Channel
Default Connection
A
1
Front Low Beam Headlights
2
Front High Beam Headlights
B
3
Not used
4
Not used
C
5
Tail Lights
6
Brake Lights
D
7
Reverse Lights
8
Not used
Warranty Information
Traxxas electronic components are warranted to be free from defects
in materials and workmanship for a period of 30 days from the date of
purchase.
Limitations: Any and all warranty coverage does not cover replacement
of parts and components damaged by abuse, neglect, improper or
unreasonable use, crash damage, water or excessive moisture, chemical
damage, improper or infrequent maintenance, accident, unauthorized
alteration or modification or items that are considered consumable.
Traxxas will not pay for the cost of shipping or transportation of a defective
component to us.
Wiring Diagram
Fig. 6
High-Voltage Power Ampli er Wiring
Front LED Light Bar Wiring
Rear LED Light Bar Wiring
Default Setting
On
Off
N/A
N/A
On
On when braking
On when reversing
N/A
Low Beam Mode
On
Off
N/A
N/A
On
On when braking
On when reversing
N/A
Change the high-voltage power amplifier settings and gain access to
additional functions using the Traxxas Link App (available in the Apple
or on Google Play™). The TQi transmitter with the Traxxas
App Store
SM
Link Wireless Module (part #6511, sold separately) are required.
This device complies with FCC Part 15 & IC RSS-210 rules subject to the following conditions: (1) This device may
not cause harmful interference, and (2) This device must accept all interference received, including interference
that may cause undesired operation.
App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
High Beam Mode
Daytime Mode
Off
Off
On
Off
N/A
N/A
N/A
N/A
On
Off
On when braking
On when braking
On when reversing On when reversing
N/A
N/A
Traxxas Lifetime Electronics Warranty
After the expiration date of the warranty period, Traxxas will repair
electronic components for a flat rate. Please visit Traxxas.com/support
for a current schedule of warranty costs and fees. The covered repairs are
limited to non-mechanical components that have NOT been subjected
to abuse, misuse, or neglect. Products damaged by intentional abuse,
misuse, or neglect may be subject to additional charges. Traxxas liability,
in no case, shall be greater than the actual purchase price of this product.
For replacement, product must be returned in brand new condition, with
packaging and itemized sales receipt.
Front Light Bar Wiring
• Route the wiring from the front
light bar under the bumper mount.
• Leave slack in the wire to allow for
bumper movement while driving.
Rear Light Bar Wiring
• Route the wiring from the rear light
bar under the bumper mount screw
boss to allow for body clearance.
Mode Select
Button
Advertisement
