Kelley HK User Manual page 13

c. The raise button may now be released. The ramp
will lower when the button is released.
24. Permanently mount
WARNING and OPERATING instruction placard on the
wall near the dock leveler control. See Fig. 19. Make
sure the customer gets the user's manual and is properly
trained.
25. Operate the dock leveler four times through the complete
cycle to check operation. (See Operation section, page
25.)
noTe:
If you have any problems or questions using or operating
the dock leveler, contact your supervisor or local Kelley
distributor for assistance.
26. Optional (where applicable), install rear angle cap plugs
(part number 6004488) into adjustment socket holes.
Press cap flush with top surface to rear angle. see fig.
20.
January 2009 6004754F — HK and HK-S Hydraulic Dock Leveler, 3 Button — Safe
the laminated dock leveler
insTaLLaTion,
Fig. 19
O P
E R
A T
IO N
S
®
Fig. 20
Cap plug
continued
Warning and operating
instruction placard
Rear angle
T
Frame
™
©2009 4Front Engineered Solutions, Inc.
13