Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Revox M10
Summary of Contents for Revox M10
- Page 1 as82 CD Control Module E2.00...
-
Page 3: Table Of Contents
Contents CD Control Module Joy Installation Connection panel Cabling RS232 connection Audio connection Setup Configuring the digital input Hiding analogue inputs Defining the CD switch-off behaviour Analogue inputs IN 1-IN 3 Cabling Setup: Edit Name General operation 12-13 CD control 14-16 Technical data Warranty... -
Page 4: Cd Control Module Joy
Type: Joy CD Player communication port. Unlike the Re:system M51 and M100, the Re:system M10 device does not have an internal CD player. Working together with the Revox Joy CD Player, it is now possible to integrate a CD Player into a Multiroom system, which can be controlled from all side rooms. -
Page 5: Installation
A suitable TORX screwdriver is supplied with the Before you install the card, the Re:system M51 and M10. M51/M10 must be switched off and separated from the power supply, by Before removing the module from its plugging the unit out. -
Page 6: Connection Panel
CD Control Re:source Connection panel RS232 Serial interface with Sub D9 socket for controlling the Revox Joy CD Player. Audio connections Control module independent audio inputs: IN 1 for Aux-1 IN 2 for Aux-2 IN 3 for Aux-3 IN 4... -
Page 7: Cabling
Normal multi-core cable with complete screening. B) For lengths up to 25m CAT7 cable. One pair of wires for each connection RX, GND, TX. The screening is connected to GND. C) With Revox prefabricated cable Length 1,5 m (Part number 1.561.020.40) -
Page 8: Audio Connection
The CD Player's audio output is connected to the IN 4 audio input (CD Control module) using a high quality stereo cinch cable. If a 5.1 Decoder module is available in the Re:system M51/M10, a digital audio connection can be Configuring the digital input established in addition - see the Chapter , Page 7. -
Page 9: Setup
ONTROL When installing the CD Control module The basic settings for the CD Control in a Re:system M51 or M10 with an module are made in Setup. installed 5.1 Decoder module, you have the option to use the digital audio signal... -
Page 10: Configuring The Digital Input
CD Control Re:source Configuring the digital input Hiding analogue inputs You can now select whether and which On the second page of the Setup (Menu of the 5.1 decoder digital inputs should softkey), the CD Control module offers receive the digital signal, using the Dig. the option of hiding the Aux-1, Aux-2 Input function. -
Page 11: Defining The Cd Switch-Off Behaviour
CD Control Re:source Defining switch-off behaviour Power Off: System Off If required, the CD Player can be After the CD has been paused or turned off completely through the stopped, the CD Player stays in this serial interface. You have 3 different state. -
Page 12: Analogue Inputs In 1-In
In this case, you should use the I/O module (article no.: 1.551.081.00), which supports both MM and MC sound systems. Both modules, the CD Control module and the I/O module, can be used together in the M51/ M10. Alternatively, an external Phono pre-amp can be used that transmits its Line... -
Page 13: Setup: Edit Name
CD Control Re:source Setup Aux-1 / 2 / 3 Edit source name The Cursor softkeys move the [ ] The display names of the three inputs cursor left and right respectively. and the CD source can be freely defined. -
Page 14: General Operation
CDs without CD text, the display Source menu. The display is designed in appears as a numbered track list. a similar way for the various Revox Apps. The display and control options in the side room through the M217/M218 display/keypad combination described in a later chapter on Page 14. - Page 15 CD Control Re:source Menu page 3 Here, the following functions are Now you can search for a specific available: track using the Select and Page • [Pause/ Play] softkeys or start to play the first track • [Repeat Disc/ Track] immediately.
-
Page 16: Cd Control
Using the two buttons (shown CD Player from each side room, with with black/white squares) on the wall- the Revox Multiroom System. If the mounted operating panel, you can M217 wall-mounted display is installed, switch within the CD to the previous or the track number and the status are the next track. - Page 17 CD Control Re:source B) Direct CDPlayer Operation following functions executed through the glass front panel of the CD Player, in parallel to the control through the Communication Module: Sensor buttons Function Short press: switch on/off (OFF: min 0.5 sec.) Long press: Complete reset - (min.
-
Page 18: Cd Control
M208 System remote control or the RC M100. In the case of the M208, the M208 Project Manager offers the device control "Revox Joy CD Player" in the [Revox] database, which makes the following CD play control commands available via infrared: •... -
Page 19: Technical Data
CD Control Re:source Technical data Audio connections: Cinch stereo input Cinch stereo input Cinch stereo input Cinch stereo input Max. cable length 10 m * CD Control Max. number of tracks: Supports CD text in the most commonly used formats * Dependent on cable environment and quality E&OE Warranty... - Page 20 CD Control Re:source User manual Joy CD-Control-Module / Article no.: 10.30.3016...